 |
3M Filtrete 3US-AF01 Under-Sink Standard Replacement Water Filter by 3M
Product DetailsManufacturer: 3M Model: 3US-AF01 Product features: - Reduces sediments, chlorine taste and odor
- Quick, easy, no mess filter changes
- No tools needed for filter changes
- Filter directly from existing faucet
- Filter lasts up to six months
Tools and Hardware Reviews of 3M Filtrete 3US-AF01 Under-Sink Standard Replacement Water FilterCustomer Review: WHCF-SR Replacement Filter for WHCF-SUF Summary: 5 Stars
This filter acts as a direct replacement for the Whirlpool WHCF-SUF Undersink Filter (WHCF-SR is the Whirlpool Filter Replacement Name).
Basically it does everything the original does, but costs about 1/3rd less than the official replacement (last time I bought one anyhow). As the directions say, make sure to have something to catch the extra water during the changeover (it loses a little bit of the extra in the filter, but doesn't spill much). Otherwise it's a very quick changeover.
One thing I noticed is that the first bit of water was a little more aerated than normal, but that resolved itself after a couple days.
No complaints.
Description of 3M Filtrete 3US-AF01 Under-Sink Standard Replacement Water FilterFiltreteTM Model 3US-AF01 Water Filter Cartridge for Advanced Filtration System Replacement cartridge for 3M FiltreteTM 3US-AS01 Advanced Faucet Water Filtration System. Also fits Whirlpool Water Systems models WHCF-SUF, WHCF-SUFC. Features: 6 month filter life Operating temperature - 40-100F Operating pressure - 25-125 psi Rated flow - 2 gpm Capacity: 2,000 gallons 5 micron nominal removal - better sediment removal with lower micron rating For cold water use only Filter height - 10" Filter Replacement Instructions: 1. Place pan under filter to collect any residual water during cartridge change-out. 2. Grasp cartridge and turn to the left (counterclockwise) until cartridge comes to a complete stop (water automatically turns off). Gently pull cartridge downward to remove. 3. Ensure that o-rings are present on the cartridge and are seated into grooves; moisten o-rings with water. DO NOT use any petroleum products to lubricate the o-rings. 4. Align tabs of new filter cartridge with existing filter head and insert new filter cartridge into head. Turn cartridge to the right (clockwise) until cartridge stops. 5. Flush new cartridge for 5 minutes.
Water Coolers & Filters
|
 |
|
|
|