| ||||
 VME ECC-8 8" P290 3-Jaw Universal Chuck with 2-piece reversible jawsBest Price: $159.00 Semi-Steel. Plain back. Includes key. Style P290 chucks include master jaws with hard reversible... |  VME ECC-8M 8" M290 3-Jaw Universal Chuck with inside jaws and outside jawsBest Price: $122.00 Plain back. Includes key. |  VME ELM-3 21/32" - 3/4" Expanding Lathe MandrelBest Price: $41.00 Center holes are ground and lapped. Consists of a tapered arbor and a flexible sleeve. Sizes may... |  1-3/8" Lathe MandrelBest Price: $32.30 |  Jet 708347/BE-57L Full 57-Inch Bed Extension w/ LegBest Price: $755.99 Extension fits well but was shipped with only some of the required bolts. Bed finish matches... |
 Bison 7-165-104 4MT Heavy Duty Live CenterBest Price: $199.00 Heavy-duty construction live center. Made of finest heat treated steel, with case-hardened... |  2MT Heavy Duty Bison Live CenterBest Price: $113.00 Heavy-duty construction live center. Made of finest heat treated steel, with case-hardened... |  PSI Woodworking CSC500K Barracuda Micro Key Lathe Chuck SystemBest Price: $114.40 I have two Nova Mercury minilathes and have been hesitant to use chucks weighing three pounds... |  Proxxon 24131 Dividing Attachment for PD 230/EBest Price: $253.79 Dividing attachment for lathe-system PD 230/E. Facilitates the machining of gear teeth and... |  Rockler Excelsior Mini Lathe Bed ExtensionBest Price: $71.99 Increases your spindle capacity to 38-1/2" on your Excelsior Mini Lathe (sold separately). |
 Chuck Adapter, 1"-8 Thread 4" Dia.Best Price: $18.00 See LittleMachineShop.com PN 1916 for a 4" diameter adapter pre-drilled for a 3-jaw chuck. |  Lathe Stand, ExtendedBest Price: $209.99 Dont mistake this stand for one of the flimsy, wobbly, sheet metal stands commonly found on the... |  WoodRiver Turners Sanding Pack 150 Grit Replacement SandpaperBest Price: $4.99 Perfect for spindle, pen, or any turning where small strips of abrasive are needed. Each... |  #2 Morse Taper Live Tail CenterBest Price: $17.99 Its time to replace your worn out or solid tail center with an affordable live center! This... |  #1 Morse Taper Live Tail CenterBest Price: $17.99 Its time to replace your worn out or solid tail center with an affordable live center! This... |
 Anti-Lock Lathe Spindle Washer 1"Have you ever had your chuck or faceplate stuck on your lathes spindle after using it? This... |  WoodRiver 60 degrees Ball Bearing Live Tailstock Center #2 Morse TaperBest Price: $23.69 WoodRiver 60 degree cone live centers are perfect for pen turning mandrels, weed pots or general... |  1" - 8 TPI 2" Diameter Aluminum FaceplateBest Price: $20.99 Easy Wood anodized aluminum faceplates are precision machined to meet the needs of the most... |  Pointed Tip Replacement CutterBest Price: $16.95 Replacement cutter for Sorby for Multi Tip Hollowing Tool. Side Swivel Tip Cutter |  WoodRiver Deluxe 4 Spur Drive Center with Spring Loaded Center Point #2MT 5/8" DiameterBest Price: $20.99 WoodRiver deluxe drive centers have sharp spurs for superior bite to help keep even difficult... |
 Grizzly H5934 Mini Lathe Chuck w/ ArborsBest Price: $46.95 If you're going to use this on small parts...fine, but if you need to push the limits of (or... |  VME 4JC-6 6" 4-Jaw Plain Back Independent Lathe ChuckBest Price: $86.00 Heavy duty. With plain back. Please note that 6" chuck mounts from the back, not with... |  .3125" (5/16") Lathe Chuck KeyBest Price: $7.50 Square Keys for lathe chucks. |  DELTA 50-341 Lathe Mobility Kit for DELTA 46-745 Steel Bed LatheBest Price: $59.00 The DELTA 50-341 Lathe Mobility Kit for DELTA 46-745 Steel Bed Lathe is designed to be used with... |  1-13/16" Lathe MandrelBest Price: $54.60 |
 VME 5MT - 5-3/4" Bull Nose Live CenterBest Price: $150.00 For holding pipes and tubes. |  2-1/2" Lathe MandrelBest Price: $96.00 |  2-7/8" Lathe MandrelBest Price: $129.00 |  SUPERNOVA 2 CHUCK WITH 4 JAW SETS AND ACCBest Price: $299.95 Why this combination? The 2" jaws are a given (they come with the chuck!). 1"... |  1 1/4 - 8 TPI - TALON CHUCK PACKAGEBest Price: $231.95 The TALON Chuck has a small body diameter and only weighs 3.5 lbs making it the perfect choice... |
| Grizzly H5934 Mini Lathe Chuck w/ Arbors Best Price: $46.95 If you're going to use this on small parts...fine, but if you need to push the limits of (or... | VME 4JC-6 6" 4-Jaw Plain Back Independent Lathe Chuck Best Price: $86.00 Heavy duty. With plain back. Please note that 6" chuck mounts from the back, not with... | .3125" (5/16") Lathe Chuck Key Best Price: $7.50 Square Keys for lathe chucks. | DELTA 50-341 Lathe Mobility Kit for DELTA 46-745 Steel Bed Lathe Best Price: $59.00 The DELTA 50-341 Lathe Mobility Kit for DELTA 46-745 Steel Bed Lathe is designed to be used with... | 1-13/16" Lathe Mandrel Best Price: $54.60 |
| VME 5MT - 5-3/4" Bull Nose Live Center Best Price: $150.00 For holding pipes and tubes. | 2-1/2" Lathe Mandrel Best Price: $96.00 | 2-7/8" Lathe Mandrel Best Price: $129.00 | SUPERNOVA 2 CHUCK WITH 4 JAW SETS AND ACC Best Price: $299.95 Why this combination? The 2" jaws are a given (they come with the chuck!). 1"... | 1 1/4 - 8 TPI - TALON CHUCK PACKAGE Best Price: $231.95 The TALON Chuck has a small body diameter and only weighs 3.5 lbs making it the perfect choice... |
 Hold Fast 3" Vacuum Chuck Kit 1" x 8 TPIBest Price: $239.00 More and more often turners are solving difficult workpiece holding problems by using vacuum... |  6" Vacuum Chuck Head Replacement O-RingsBest Price: $5.50 The 6" vacuum head replacement seals are for the Hold Fast Vacuum Chucking System. |  Bowl Turning DVDBest Price: $17.99 Del Stubbs shows you how to turn beautiful bowls and plates. You can start with dry lumber or... |  Ci3 Mini Finisher Replacement Carbide CutterBest Price: $16.99 Ci3 Mini Finisher Replacement Carbide Cutter |  Taig 1210 - Radius TunerBest Price: $18.95 The radius turning tool will turn ½ ball ends on rods up to 3/4" diameter. The round... |
 Turn It On with Jimmy Clewes Set of 3 DVDBest Price: $59.99 Popular woodturning instructor Jimmy Clewes demonstrates six detailed projects in this 3 DVD... |  Taig 4 Jaw Self Centering chuckBest Price: $68.78 I got this chuck to put on a tilting clamp fixture for a microscope to hold parts while I... |  PEN PRESS BY PEACHTREE WOODWORKING PW7004Best Price: $39.99 The ideal tool for pressing pen crafting/assembly components together in a quick and simple... |  Taig Die HolderDie holder for tailstock (will accept 13/16" and 1.00" button dies) |  LH and RH carbide insert tool holder setBest Price: $43.00 Carbide insert tooling has become the tooling of choice in most professional machine shops... |
 Quick-change carbide insert tool holder for 2250Best Price: $88.00 Add the ability to hold carbide insert tools in your Sherline P/N 2250 quick-change tool post... |  80° and 55° carbide insert boring toolsBest Price: $93.00 Carbide insert tooling has become the tooling of choice in most professional machine shops... |  Grizzly H5902 Bull Nose Center MT#3 X 2"Best Price: $56.95 |  Royal Products 43370 1/8" to 3-1/2" Bar Capacity Heavy Duty Bar Puller With 1" Square ShankBest Price: $762.18 Bar pullers provide a cost effective way to automate CNC lathes. Unit is very easy to use.... |  Royal Products 43452 1/8" to 1-5/8" Bar Capacity Combo Bar Puller With 1/2" Square ShankBest Price: $654.57 Bar pullers provide a cost effective way to automate CNC lathes. This unique two-in-one design... |
 Bison 7-878-129 12" D-1-11 Back PlateBest Price: $401.80 For Bison Lathe Chucks |  Grizzly H6268 1" Pin Jaws For 4 Jaw ChuckBest Price: $21.95 These are very well made jaws. They are also compatible with the Vicmarc VM100 chuck. If you... |  JET 709519 MIDI Lathe Chuck with 2-Inch JawsBest Price: $179.00 This chuck is a good little piece of machinery, keyword: "little". I've used it on... |  2-3/8" Lathe MandrelBest Price: $81.50 |  VME ELM-8 1 1/2" - 2" Expanding Lathe MandrelBest Price: $110.00 Center holes are ground and lapped. Consists of a tapered arbor and a flexible sleeve. Sizes may... |
 3/4" Lathe MandrelBest Price: $12.80 |  5/16" Lathe MandrelBest Price: $8.60 |  2" Lathe MandrelBest Price: $60.20 |  VME ELM-7 1 1/4" - 1 1/2" Expanding Lathe MandrelBest Price: $79.00 Center holes are ground and lapped. Consists of a tapered arbor and a flexible sleeve. Sizes may... |  Grizzly H8048 6" 4-Jaw Chuck - 3/4" x 16 TPIBest Price: $30.95 Works perfectly ... particularly for internal chucking. It's everything the occaisional user... |
 Anytime Tools 5 Lathe Mill CENTER DRILL COUNTERSINK Bit Tooling SETBest Price: $13.99 I was surprised at how well ground these center drills are. After checking the angles and how... |  STEELEX 6" 3 jaw wood lathe chuck NEW bushing style fits most popular threads!Best Price: $139.99 This handy tool allows for much versatility with your wood lathe. It adapts the unit over to a 3... |  100mm Face Plate RingBest Price: $35.69 Face Plate Rings - when you want an extra solid grip on your work. Designed to secure onto the... |  Laguna Tools 6" 4-Jaw Key Lathe Chuck SetBest Price: $672.00 6" 4 - Jaw Key Chuck Set W/ 6 Sets Jaws, 3PCS Adaptor & Wooden Box 6" 4-Jaw Key... |  PEN VISE BY PEACHTREE WOODWORKING PW7003Best Price: $49.99 Easily locate and drill pen blank centers with the Pen Centering vise. Set the jig up once and... |
 JET 660220 24-Piece Milling Tool Kit for R8-Spindle Milling MachinesBest Price: $118.51 JET 660220 24 Piece Milling Tool Kit for R8 Spindle Milling Machines24pc Set consists of: 5pc... |  4" Steel Wood Lathe Face Plate, 1" x 8tpi ThreadedBest Price: $21.99 This is a well made, heavy faceplate. At 7/16" thick, it is rigid and well balanced. |  9" South Bend Lathe Bull GearIf you need more torque and power, this bull gear it the right gear. The bull gear is excellent... |  Turning Acrylic Materials DVDBest Price: $22.95 No longer will you be intimidated by acrylics! Master Pen Maker Barry Gross demonstrates all of... |  Grizzly G8792 Carbide Inserts - PartingCUT OFF INSERT-PACK OF 5 |
 Grizzly G7039 Carbide Insert for Steel, RH - For use w/ G7028INSERTS, 5PC STL FOR G7028 |  Quick-change tool post systemBest Price: $258.00 Many jobs require multiple changes of cutting tools for different operations. This quick-change... |  Royal Products 43512 Replacement Extra Capacity Jaws Set To Fit Heavy Duty Bar PullerBest Price: $145.38 CNC Bar Pullers - Lathe Tools Type: Step Jaws for Model A Bar Puller |  1" - 8 TPI 3" Diameter Aluminum FaceplateBest Price: $25.99 Easy Wood anodized aluminum faceplates are precision machined to meet the needs of the most... |  Universal Pen Tube Insertion ToolBest Price: $11.99 Keep the glue where it belongs and not on your fingers! Providing a wider range of versatility... |
 Live Center MT# 3 TaperBest Price: $33.00 Live center |  Robust 4" Mini Rest with 5/8" PostBest Price: $54.59 For use with most mid and mini lathes, these rests feature a 5/8" diameter x 2-3/4"... |  Replacement Cutter for General 25-024 DuplicatorBest Price: $23.25 Fits General 24" duplicator model #25-024 |  Dico Prod. Corp. 584-43605 Polishing BonnetBest Price: $3.45 8"terry polishing bonnet. Use for compounding and polishing. Terry cloth elastic edge,... |  Jesada B01-000-RH Heavy-Duty Boring Chuck, RH, Fits NottmeyerBest Price: $11.83 |
 Delta 46-951 6-Inch Lathe ChuckThe chuck is really well made and the wrench moves the jaws very smoothly. Unfortunately I have... |  Grizzly G8783 4-Jaw Chuck For Round Pieces - 3/4" x 16 TPIBest Price: $54.95 The other chucks you've probably already looked at are expensive; on my budget, I... |  Grizzly G7041 Carbide Insert for Steel - For use w/ the G7030Best Price: $13.95 INSERTS, 5PC STL FOR G7030 |  35mm Spigot Jaw SetBest Price: $40.79 Nova jaw sets add even greater versatility to the Nova Midi, SuperNova2 and Nova Titan chucks.... |  5/8" turning tool set with extra set of carbide insertsBest Price: $169.99 |
 Collet & Chuck Set, 2MT, ER-25Best Price: $138.00 |  Tool Rest, Straight, 12" WideBest Price: $57.99 Tired of using a tool rest thats too short, too soft and designed by an engineer that has no... |  Outboard Tool Rest AssemblyIncrease your Nova Wood Lathe to 16" of inboard capacity and 29" of outboard capacity.... |  Threaded Adapter, 3/4"- 16Best Price: $28.95 Stronghold Threaded Adapters allow maximum versatility! Each Stronghold Chuck has a removable... |  1/2" Dia., Small Four Spur Center, #2 MTHaving the correct size and style drive center makes your turning easier and safer. When turning... |
 Cole Stops and Screws, Extra (8)Best Price: $10.19 Replacement stops and screws for Teknatool Cole Jaw Sets. Use in the Nova chuck while the Cole... |  Woodturning Projects with Rex and Kip Volume 2 DVDby Rex Burningham and Kip Christensen. WoodTurning Projects with Rex and Kip Volume 2 DVD. This... | |||
Tools and Hardware