| ||||
 Spur driverBest Price: $25.00 The spur driver is mounted in the headstock. It has a #1 Morse taper and comes with a drawbolt... |  Grizzly H5915 Miniature 7 pc. Chisel SetBest Price: $10.95 These are very useful to me. There is not a lot of variety in shape or size, I think there are 3... |  Grizzly H5903 Bull Nose Center MT#4 X 5"Best Price: $78.95 |  Bison 7-889-012 .551" Lathe Chuck KeyBest Price: $43.50 Square Keys for lathe chucks. |  .500" (1/2") Lathe Chuck KeyBest Price: $12.50 Square Keys for lathe chucks. |
 VME 4JC-4 4" 4-Jaw Plain Back Independent Lathe ChuckBest Price: $75.00 Heavy duty. With plain back. Please note that 4" chuck mounts from the back, not with... |  Bison 7-870-108 8 1/4" Unfinished Back PlateBest Price: $114.50 Cast-iron adapters for lathe chucks. Please look at the picture for the key to 'A',... |  1/8" Lathe MandrelBest Price: $7.80 |  VME ELM-2 9/16" - 21/32" Expanding Lathe MandrelBest Price: $34.00 Center holes are ground and lapped. Consists of a tapered arbor and a flexible sleeve. Sizes may... |  3MT Medium Duty VME Live CenterBest Price: $21.95 |
 .375" (3/8") Lathe Chuck KeyBest Price: $7.50 Square Keys for lathe chucks. |  VME ECC-4 4" M290 3-Jaw Universal Chuck with inside jaws and outside jawsBest Price: $75.00 Plain back. Includes key. |  Jet 321443AK Lathe Cabinet Stand for 321357A & 321360ABest Price: $409.00 Includes CBS-1340 Cabinet Stand for 321357A & 321360A - 321443AK |  Cole Jaw SetBest Price: $67.99 This may be the best thing, other then a vacuum chuck, for reverse chucking a bowl. Why do you... |  9/16" Lathe MandrelBest Price: $12.00 |
 2-5/8" Lathe MandrelBest Price: $107.00 |  VME ELM-9 2" - 2 3/4" Expanding Lathe MandrelBest Price: $196.00 Center holes are ground and lapped. Consists of a tapered arbor and a flexible sleeve. Sizes may... |  VME ELM-5 7/8" - 1" Expanding Lathe MandrelBest Price: $46.00 Center holes are ground and lapped. Consists of a tapered arbor and a flexible sleeve. Sizes may... |  VME 4MT - 5" Bull Nose Live CenterBest Price: $110.00 For holding pipes and tubes. |  VME ELM-6 1" - 1 1/4" Expanding Lathe MandrelBest Price: $74.00 Center holes are ground and lapped. Consists of a tapered arbor and a flexible sleeve. Sizes may... |
| .375" (3/8") Lathe Chuck Key Best Price: $7.50 Square Keys for lathe chucks. | VME ECC-4 4" M290 3-Jaw Universal Chuck with inside jaws and outside jaws Best Price: $75.00 Plain back. Includes key. | Jet 321443AK Lathe Cabinet Stand for 321357A & 321360A Best Price: $409.00 Includes CBS-1340 Cabinet Stand for 321357A & 321360A - 321443AK | Cole Jaw Set Best Price: $67.99 This may be the best thing, other then a vacuum chuck, for reverse chucking a bowl. Why do you... | 9/16" Lathe Mandrel Best Price: $12.00 |
| 2-5/8" Lathe Mandrel Best Price: $107.00 | VME ELM-9 2" - 2 3/4" Expanding Lathe Mandrel Best Price: $196.00 Center holes are ground and lapped. Consists of a tapered arbor and a flexible sleeve. Sizes may... | VME ELM-5 7/8" - 1" Expanding Lathe Mandrel Best Price: $46.00 Center holes are ground and lapped. Consists of a tapered arbor and a flexible sleeve. Sizes may... | VME 4MT - 5" Bull Nose Live Center Best Price: $110.00 For holding pipes and tubes. | VME ELM-6 1" - 1 1/4" Expanding Lathe Mandrel Best Price: $74.00 Center holes are ground and lapped. Consists of a tapered arbor and a flexible sleeve. Sizes may... |
 Laguna Tools Lathe Copy AttachmentBest Price: $450.00 Copy attachment for lathe. |  Lathe Chuck, 3-Jaw 6"Best Price: $83.00 This 6" 3-Jaw self-centering lathe chuck includes a chuck key, inside and outside jaws, and... |  Threaded Adapter, 1-1/4" - 8Best Price: $19.99 Stronghold Threaded Adapters allow maximum versatility! Each Stronghold Chuck has a removable... |  Nova Dovetail ChiselThe product is quality made and works very well . I am pleased with it . |  Hold Fast Chuck Reversing Adapter 1-1/4" x 8 TPI - #2 Morse TaperBest Price: $34.99 This chuck reversing adapter features a #2MT on one end to fit into your tailstock and threaded... |
 RIKON 70-926 Tool Rest with 5/8-Inch Post, 6-InchBest Price: $21.99 Rikon 6" Tool Rest |  Tool Rest, 3"Best Price: $22.09 Handy for smaller work when you dont want a tool rest to get in the way. 1" shank. |  General International Mini Midi Lathe 24" DuplicatorBest Price: $229.99 For anyone who has to make more than a single turned object, duplicators are almost essential to... |  Carnauba Wax 5-1/2" x 2" x 5/8"Best Price: $6.99 Replacement carnauba wax bar for the Beall Wood Buff System. |  WoodRiver Turners Sanding Pack 240 Grit Replacement SandpaperBest Price: $4.99 Perfect for spindle, pen, or any turning where small strips of abrasive are needed. Each... |
 Felt Wiper & Way Oil Combo for South Bend Lathe 10LBest Price: $19.49 Replace your old hard wipes with our precision wipes cut from high quality felt. Use our top of... |  9" South Bend Lathe Hand Wheel Collet CloserVery nice South Bend collet closer draw bar. Smooth movement on hand wheel sleeve, very nice... |  South Bend Lathe Heavy 10" Back GearsA gear mounted at the back of the headstock, that allows the chuck to rotate slowly with... |  2 Bottles Mobil Lathe Oil for South Bend, Leblond, Atlas, LoganBest Price: $15.99 Keep you lathe running smooth with Velocite #6 spindle oil and your slides with #2 way oil. |  Jet 709490 1-Inch 8-Thread-per-Inch Chuck Insert for Nova and SuperNovaBest Price: $39.89 Essential item to use the Teknatool Nova Scroll chuck on any lathe with a 1" headstock... |
 DELTA 46-933 Spur Drive for Wood LathesBest Price: $31.95 This is a nice spur drive. The machining is good, the spurs are sharp and nicely angled. It is a... |  DELTA 46-711 12-Inch Tool Rest For LathesThis tooling at best just functional, of marginal quality and way over priced as all Delta... |  Spacer block kitBest Price: $68.00 The spacer block kit allows parts of larger diameters to be turned on the lathe. By raising the... |  Sherline 3018 - Rear Mount Cut-off Tool HolderBest Price: $48.00 If you always intend to mount your cut-off tool on the rear side of the part where it is out of... |  Wood tool rest set, extended height for riser blocksBest Price: $59.00 For wood turning using traditional hand-held chisel type tools, the tool is rested on and slid... |
 5/8" Lathe MandrelHardened and ground. Tapered .0005' per inch. Undersize at small end.Diameter:... |  VME ELM-10 2 3/4" - 3 3/4" Expanding Lathe MandrelBest Price: $268.00 Center holes are ground and lapped. Consists of a tapered arbor and a flexible sleeve. Sizes may... |  1/2" Lathe MandrelBest Price: $10.00 |  5/8 Plain - STRONGHOLD CHUCK PACKAGEBest Price: $286.95 #################################################################################################### |  PSI Woodworking TCLC12XB Commander 12-Inch Midi Lathe Extension BedBest Price: $72.10 Our Extension Bed easily attaches to the Turncrafter Commander 12-Inch Midi Lathe and extends... |
 Proxxon 27026 Three Jaw Chuck for the Lathe DB 250Best Price: $52.95 We purchased this jaw chuck for the micro lathe Proxxon 37020 DB 250 MICRO Woodturning Lathe ... |  Powermatic 6294733 3520B Lathe Remote On-Off SwitchBest Price: $117.98 Includes Remote On/Off Switch for 3520B Lathe - 6294733 |  1/2'' Drill Chuck (Morse Tapers Sold Separately)Best Price: $31.49 Fits the MT2 tail just fine. Doesn't bore as far as I was hoping. Don't loose the... |  5/8" Plainbore Insert for Nova Chucks (to fit Shopsmith)Best Price: $19.99 |  7/8" Diameter, #2 MTBest Price: $55.00 This innovative drive center incorporates a spring-loaded stainless steel point and a set of... |
 Mini Cole Jaw SetBest Price: $49.95 The screws provided are too long and bottom out. The diameter of the heads of the screws are... |  12" Round Tool RestNever again be without the right length tool rest. By simply interchanging the tool rest bars on... |  6" Vacuum Head 1-1/4" x 8 TPIBest Price: $67.99 The 6" Vacuum Chuck Head can hold convex or concave shaped workpieces. Made of glass filled... |  Tripoli Bar (6" x 2" x 1")Best Price: $6.99 Replacement tripoli compound for the Beall Wood Buff System. |  Extra Screw ChuckBest Price: $16.14 Extra Screw Chuck - 19mm (3/4") long, RH. |
 Ci1 Easy Rougher Replacement R4 Radius CutterBest Price: $13.99 Ci1 Easy Rougher R4 Radius cutter |  Taig -1190 Steady RestBest Price: $23.95 A simple plate with a bored hole which mounts to the bed. three brass fingers are adjustable to... |  The New Wood Turning DVD with Richard RaffanBest Price: $18.95 With lots of new techniques and up-to-date information on sharpening and using tools, heres the... |  Peachtree Woodworking 3/4 X 3/4 X 5 ACRYLIC PEN BLANK STORM CLOUDBest Price: $4.99 These acrylic blanks are undrilled, 3/4" x 3/4" square x 5" long. The blanks are... |  OneWay Bowl Steady Clamp Block, GeneralThe OneWay Bowl Steady Rest is designed to reduce vibration at the rim of a bowl or platter,... |
 Robust 12" Low Profile Rest with 1" PostBest Price: $73.49 The Low Profile rests were designed for smaller lathes that will not accommodate tall cross bar... |  South Bend Lathe Independant 4 Jaw Chuck 4006This South Bend Lathe Independent 4 Jaw Chuck is an excellent way of keeping a strong hold on... |  Vermont American 14951 1/4-inch Drill Chuck with KeyBest Price: $16.70 Designed to fit all popular drills ... |  DELTA 46-490 Ball Bearing Center for Wood LathesBest Price: $70.85 Delta 46-490 Ball Bearing Center for Wood Lathes multi centers can be used. It works! |  DELTA 46-712 Economy Ball Bearing CenterBest Price: $19.99 I went against my own rule and bought the economy version of a tool. I thought "what... |
 Grizzly G7040 Carbide Insert for Steel, LH - For use w/ G7029, G7031 or G7032Best Price: $14.95 INSERTS, 5PC STL FOR G7029,31,32 |  Adjustable tailstock chuck arborBest Price: $43.00 This adjustable chuck holder gives you a way to achieve perfect alignment between the point of a... |  WW collet deluxe boxed set, inchBest Price: $270.00 The deluxe boxed collet set includes a popular selection of the most common size collets, a... |  Radius cutting attachmentBest Price: $118.00 This accessory pivots a lathe tool around an adjustable center point to allow you to put a... |  3/8" insert tool postBest Price: $20.00 This tool holder is used for tools with 3/8 round or square shanks. For example, it could be... |
 Rikon 70-910 Universal Mini Lathe StandBest Price: $179.99 Stand to fit Rikon mini lathe model 70-100 |  Tool Bits, 1/4" Presharpened Set of 6Best Price: $28.95 |  Tooling Package, Mini LatheBest Price: $165.95 This package contains all the tooling you need to be productive with your 7x10, 7x12 or 7x14... |  Jaws, #1Best Price: $49.95 Oneway Stronghold #1 Jaws for holding small work. Grips round or square stock from 1/2" to... |  Jaw Screws - 8 per packBest Price: $2.69 Try our 8 extra jaw screws for the WoodRiver Turning Chuck. |
 WoodRiver 1" Diameter Chuck InsertBest Price: $19.79 This drive center insert is designed to be held in the jaws of most lathe chucks so you can... |  50mm Face Plate RingBest Price: $26.78 Face Plate Rings - when you want an extra solid grip on your work. Designed to secure onto the... |  Nova Pin Jaw SetBest Price: $48.44 Nova Pin Jaws operate like a pin chuck but without the hassles! An extended 25mm (1")... |  Ci1 Easy Rougher Replacement Square CutterBest Price: $13.99 Ci1 Easy Rougher Square cutter |  Beall 1-1/4" x 8 TPI Spindle TapBest Price: $26.99 Tired of the hassle of mounting wooden blocks to your lathe faceplates? Now you can make all the... |
 Royal Products 43520 1/2" And 3/4" Part Off Blade Holder And Insert To Fit Shank Combo Bar PullerBest Price: $121.66 |  Royal Products 44002 A2-5 Spindle To 170 mm Chuck Adapter PlateBest Price: $717.31 Adapter plates offer the flexibility to mount collet chucks and 3-jaw chucks to a wider range of... |  Steel Chuck Jaws for Taig 1050 3 Jaw Set of 3Best Price: $59.95 3 Jaw 3¼" diameter self-centering Scroll Chuck (steel body) with reversible aluminum... |  Taig 1150 - Drilling TailstockBest Price: $36.95 works great very smooth moving arm easy to tighten down the arm i would recommend this to any... |  Royal Products 43688 3 mm to 76 mm Bar Capacity Compact Bar Puller With 25 mm Square ShankBest Price: $589.79 Bar pullers provide a cost effective way to automate CNC lathes. Unit is very easy to use.... |
 Spindle Steady for Nova 3000/DVRSpindle turners have been using steady rests for as long as people have been turning wood for... |  Badger Hair Bristle Brush 20mmBest Price: $10.25 I thought it came with the wood handle they should have made it clear that the wood handle... |  Turned Bowls Made Easy DVDBest Price: $24.99 In this DVD Bill Grumbine takes you from a log to a bowl you will be proud to give or sell to... |  Felt Wiper & Way Oil Combo for South Bend Lathe 9 & 10"Best Price: $19.49 Replace your old hard wipes with our precision wipes cut from high quality felt. Use our top of... | |
Tools and Hardware