 |
Shelf Unit (Natural) (60"h x 30"w x 13"d) by Adwood Mfg. Ltd.
Product DetailsManufacturer: Adwood Mfg. Ltd. Brand: Adwood Mfg. Ltd. Publisher: Adwood Mfg. Ltd. Studio: Adwood Mfg. Ltd. Music Label: Adwood Mfg. Ltd. Product features: - Color: Natural
- Size: 60"h x 30"w x 13"d
- Solid pine shelves adjust in height. Unfinished, they can easily be painted or stained.
- Holds 150lbs per shelf.
- Note: Knots and different colorations are characteristic of natural unfinished pine.
Tools and Hardware Reviews of Shelf Unit (Natural) (60"h x 30"w x 13"d)Customer Review: So Unfortunate. Summary: 1 Stars
I had such high hopes for this shelf kit - enough to pour hours and hours of my time into sanding, staining and finishing each piece by hand, prior to assembly.
Then I discovered that the pieces don't always align with the factory pre-drilled pilot holes on the shelf ends, when you use the screws to assemble the legs to the shelves. Further study revealed that not only were these pre-drilled holes not always in the right spots, (which catch and pull your screw the wrong way when you are screwing it in), but the other reason for the holes ending up in the wrong spots is that the shelf ends aren't always factory assembled (permanently glued beforehand) together evenly.
Sloppy factory assembly.
Another problem emerged; the shelf vertical long pieces are pre-fit onto shelf ends from which a routered bit of pine emerges - this is small, brittle, and cracks easily along its grain. I lost several shelves because of these long cracks, and tried re-gluing some to "save" them....
This means that any appreciable weight you put on these shelves might cause the shelf to collapse.
I drilled new pilot holes, and managed to put some of my kit together, but out of two tall tower shelves and a short 3 shelf unit, I am left with two short shelf units that are imbalanced and crooked looking.
My initial $150 investment, all the time to sand, stain and finish not worth anything now.
Description of Shelf Unit (Natural) (60"h x 30"w x 13"d)Sturdy simplicity. Unfinished pine shelving is durable and versatile. Pinewood can be easily sanded and stained or painted to complement your decor, or left unfinished for a rugged look. The adjustable shelves make these wooden storage shelf units handy for a variety of uses: as an entertainment center, a place to store games, sporting gear, etc., or for garage and basement storage. Available with a 12" shelf depth (inside dimensions) which holds up to 150 lbs per shelf. Easy assembly with included tool. This product is constructed with unfinished pine wood and may contain knots and different colorations which are characteristic of this type of natural wood. Assembly required. Phillips screwdriver (not included). Please note: The shelves on this unit are constructed of wood slats with a 1/2 inch gap between each. The unit, when assembled, is actually two 2-shelf units which are then stacked and connected with wooden pegs. Please note: The measurements are approximate and may fluctuate slightly from one unit to the next. .
Standing Shelf Units
|
 |
|
|
|