All in One Clamp U-54 54-Inch Ultra Wide Grip Clamp with Double T-Track
by E. Emerson Tool Co
 |
List Price: Our Price: $59.99 You Save: $22.00 (27%) Availability: Usually ships in 24 hours Category: Tools See more product details |
Product Details
Manufacturer: E. Emerson Tool CoModel: U-54
Product features:
- Ultra-wide straight edge clamp with a double T-track
- T-track accepts a variety of accessories stops, router plates, saw plates
- Wide aluminum jaws with holes that accept accessories
- Router, saw plates and stop blocks fit all of the clamps
- 54 inches long; weighs 6.2 pounds
- Exploring Woodworking: Fundamentals of Technology
- Fine Woodworking
- Gorilla Glue 50008 Adhesive, 8-Ounces
- All in One Clamp RP 8-Inch by 9-Inch Router Plate
- All in One Clamp SB Stop Block w/ Micro Adjustment
Tools and Hardware Reviews of All in One Clamp U-54 54-Inch Ultra Wide Grip Clamp with Double T-Track
Customer Review: Great Straight Edge for Circular Saw Cutting
Summary: 5 Stars
This is an excellent straight edge for cutting plywood with a circular saw. It does not flex at all and the clamping mechanism holds securely on 3/4" plywood.
The best part is the clamp grabs the edges of the plywood and secures with a single lever. Now when I have to cut plywood, or other sheet goods, I throw a piece of 3/4 particle board on my saw horses, then a 2" thick sheet of pink insulating foam, then the sheet I am going to cut. This way I can make multple cuts on the pywood without re-positioning the sheet/sawhorses. The particle board+foam supports the entire sheet so I do not have to worry about "catching" the piece at the end of the cut.
The clamp does not self align so you have to either check the squareness with a tape measure or if you are making multiples of the same cut, make a measuring jig with a stop block out of some scrap lumber. I wrote the required offsets for my circular saw base right on the clamp to speed things up when I am using a tape.
I just finished cutting sides for 6 base cabinets using this clamp and two measuring jigs, one for the height and one for the width. It took about half the time as my old method of using two 6" clamps to hold a straight edge to the board. There was 1/64" or less variation in size between the pieces.
Other Comments - I would not bother buying the guide that rides on the top track if your are using this with a circular saw, it is really easy to keep the base against the guide. The guide has a low enough profile to clear my saw motor so I can cut with the guide against either side of my circular saw base, this is a nice plus.
Description of All in One Clamp U-54 54-Inch Ultra Wide Grip Clamp with Double T-Track
The E. Emerson Tool Company U-54 All-in-One 54-Inch Ultra Wide Grip Clamp adds extra width for superior rigidity and two T-tracks for attaching a wide range of accessories, including stops, router plates, and saw plates. Wide aluminum jaws protect soft surfaces from wear, and the jaw holes allow you to insert tall jaws, wide jaws, and story sticks. It's especially good for 4-foot sheets, and it's the most durable, most robust clamp you can buy.Edge Clamps Tools
Tools and Hardware
Bestsellers in Edge Clamps Tools
All in One Clamp SB Stop Block w/ Micro AdjustmentE. Emerson Tool Co; Tools
Best price: $15.99
Price in other shops:
All in One Clamp A-36 36-Inch Grip Clamp Guide with T-TrackE. Emerson Tool Co; Tools
Best price: $27.90
Price in other shops:
All in One Clamp A-24 24-Inch Grip Clamp Guide w/ T-trackE. Emerson Tool Co; Tools
Best price: $24.99
Price in other shops:
All in One Clamp RP 8-Inch by 9-Inch Router PlateE. Emerson Tool Co; Tools
Best price: $24.99
Price in other shops:
All in One Clamp SP 9-Inch X 12-Inch Saw PlateE. Emerson Tool Co; Tools
Best price: $24.99
Price in other shops:
All in One Clamp U-54 54-Inch Ultra Wide Grip Clamp with Double T-TrackE. Emerson Tool Co; Tools
Best price: $59.99
Price in other shops:
All in One Clamp U-99 99-Inch Ultra Wide Grip Clamp with Double T-TrackE. Emerson Tool Co; Tools
Best price: $115.40
Price in other shops:
All in One Clamp #WJ Wide Jaws Fixture for All in One Clamp (2-Pack)E. Emerson Tool Co; Tools
Best price: $16.38
Price in other shops:
Pony 8510BP Cabinet Claw (2-Pack)Adjustable Clamp Co; Tools
Best price: $56.63
Price in other shops:
All in One Clamp A-50 50-Inch Grip Clamp Guide w/ T-trackE. Emerson Tool Co; Tools
Best price: $34.99
Price in other shops:
Similar Tools and Hardware Products
Kreg PRS3020 True-FLEX Featherboard - Twin PackKreg; Tools
Best price: $24.91
Price in other shops:
All in One Clamp TJ Tall Jaws Set of 2E. Emerson Tool Co; Tools
Best price: $14.94
Price in other shops:
Freud D0740X Diablo 7-1/ 4 40 Tooth ATB Finishing Saw Blade with 5/ 8-Inch Arbor, Diamond Knockout, and PermaShield CoatingDiablo; Tools
Price in other shops:
All in One Clamp A-36 36-Inch Grip Clamp Guide with T-TrackE. Emerson Tool Co; Tools
Best price: $27.90
Price in other shops:
All in One Clamp SB Stop Block w/ Micro AdjustmentE. Emerson Tool Co; Tools
Best price: $15.99
Price in other shops:
All in One Clamp A-24 24-Inch Grip Clamp Guide w/ T-trackE. Emerson Tool Co; Tools
Best price: $24.99
Price in other shops:
All in One Clamp RP 8-Inch by 9-Inch Router PlateE. Emerson Tool Co; Tools
Best price: $22.95
Price in other shops:
All in One Clamp SP 9-Inch X 12-Inch Saw PlateE. Emerson Tool Co; Tools
Best price: $24.99
Price in other shops:
All in One Clamp U-99 99-Inch Ultra Wide Grip Clamp with Double T-TrackE. Emerson Tool Co; Tools
Best price: $110.13
Price in other shops:
All in One Clamp #WJ Wide Jaws Fixture for All in One Clamp (2-Pack)E. Emerson Tool Co; Tools
Best price: $9.99
Price in other shops: