| ||||
 Electric Sink Anchor Machine #31 w/Vacuum PadBest Price: $1,270.20 4.5 Amp. 120V electric die grinder on electric models. requires ground fault protection circuit.... | Electric Sink Anchor Machine #31 w/Vacuum Pad Best Price: $1,270.20 4.5 Amp. 120V electric die grinder on electric models. requires ground fault protection circuit.... |  Pro-Grip Mortising Hinge Mate By Peachtree Woodworking PW584Best Price: $54.99 A simple to use hinge mortising system, the Hinge-Mate is completely adjustable and will work on... |  Pro-Grip Wide Body Straight Edge Clamp By Peachtree Woodworking PW582Best Price: $59.99 The 50" allows you to crosscut a half sheet of plywood. The triple cam lock system ensures... |  Hold Down Kit For Pro-Grip Straight Edge Clamps PW598Best Price: $20.99 The heavy duty Pro-Grip hold down kit is perfect for holding your stock down on your drill... |
 Omni Cubed 8' Sink Hole Saver - New Improved StyleBest Price: $363.00 The Sink Hole SaverTM by Omni Cubed is an innovative stiffening device that protects finished... |  Pneumatic Sink Anchor Machine #31 w/Vacuum PadBest Price: $1,154.20 T-31 Original Pneumatic machine with vacuum pad require 18-20 cfm air at 90-100 psi. -- Made in... |  Gross Stabil KSV EXT 40-Inch Box Clamp Extention |  All in One Clamp T-36 36-Inch Double Grip Bench Clamp w/T-trackBest Price: $46.03 I've dropped mine a few times off of my workbench to conrete floor. Has not broken yet. It... |  E. Emerson Tool T-50 All in One Clamp 50-Inch Double Grip Bench Clamp with T-trackBest Price: $49.60 at first i was disappointed in the flimsy nature of the product. i figured it should be... |
 All in One Clamp I-50 50-Inch Scale (English)The tape used to create the scale appears to be a plastic laminated on a paper strip whereon the... |  CL-K3.524 - Bessey - BESSEY K BODY CLAMP-24" OpeningBESSEY K BODY CLAMP-24" Opening |  Pro-Cart AT1 Folding Kit for Omni Pro-Cart AT1 CartBest Price: $121.00 The Pro-Cart AT1 Folding Kit is an upgrade accessory that allows the cart casters to be rotated... |  Gross Stabil KS 150 60-Inch Box Clamp |  All in One Clamp A-50 50-Inch Grip Clamp Guide w/T-trackBest Price: $44.99 I purchased this a few weeks ago (from Amazon) with the wide jaws because of the recommendations... |
 All in One Clamp BSF Band Saw Fence |  All-In-One Clamp XWJ Wide Jaws Fixture for All-In-One Clamp (2-Pack)Best Price: $11.38 These wide jaws are added to the Emerson line of clamping straight edges. They make the part... |  Von Freeman - Maestro M103 Clamp-All ExpandersBest Price: $15.02 Item number 24969-45, Grading is cover/record: VG using Goldmine standards. 196? Please see... |  BORA 100in. Clamp EdgeBest Price: $128.99 The Bora Clamp Edge is a straight edge tool guide with integrated clamps for Circular Saws, Jig... |  PRO-GRIP 90 DEGREE HEAD BY PEACHTREE WOODWORKING PW569Best Price: $14.99 This accessory reduces the clamp capacity on a 24" clamp to 23.75". For the price it... |
 Jet 709854 4-Piece Clamp Pad SetJet 709854 4-Piece Clamp Pad Set is a heavy-duty PVC pads that protects workpiece. Slips easily... |  Pro-Grip Re-Saw Jig By Peachtree Woodworking PW587Best Price: $49.99 The PRO-GRIPTM band saw resaw jig allows you take most any non-uniform shaped piece of wood and... |  All in One Clamp A-12 12-Inch Grip Clamp Guide with T-TrackBest Price: $23.95 I ordered the 48" version of this useless clamp. The sliding mechanism doesn't slide... |  Clamp, 3-Way Edge Clamp, Opening Capacity=2 1/2, Depth of Throat=2 1/2, Screw Dia.=3/8 (1 Each)Three screw design permits right angle screw to be centered, or positioned above or below... |  Economy Cam Action Edge ClampBest Price: $13.99 No longer do you have to fight an array of clamps, clamping blocks, and clamps clamped to clamps... |
 All in One Clamp MP 3-Inch X 4-Inch Mini Saw Plate |  Bora 542002 Clamp Edge Wide Track Auxiliary Clamps - PairBest Price: $18.50 Turn your BORA Clamp Edge Wide Track tool guide into a simple back-to-back clamp for holding... |  Bora 541050 Clamp Edge Wide Track, 50-InchBest Price: $54.42 Works well no deflection and the saw does not ride up or slide under like the other guide I... |  All in One Clamp PHJ Pocket Hole Jig with Step Drill and Square Driver |  7-inch Stainless Steel Sponge Forcep Hemostat - Self LockingBest Price: $3.96 |
 Gator Clamps 410-36 36-Inch Clamp N Cut Multi-Purpose Woodworking ToolBest Price: $29.70 It can be a bit difficult to get a tight clamp, but generally these work ok. I have found it... |  CL-TGJ2.518 - Bessey - BESSEY TRADESMEN CLAMP-18" OpeningBest Price: $15.70 BESSEY TRADESMEN CLAMP-18" Opening |  Side to Side Connectors for Pro-Grip Clamps 6 Pack PW597Best Price: $12.99 Attach any two PRO-GRIPTM straight edge clamps to create your own back to back or side by side... |  Pro-Anchor T-31 Anchor Machine Pneumatic with VacuumBest Price: $922.20 The Pro-AnchorTM T-31 Anchor Machine by Omni Cubed, Inc. is used to easily and precisely cut... |  All in One Clamp M-99 99-Inch Scale (Metric) |
 All-In-One XTJ Tall Jaws Fixture for All-In-One Clamp (2 pack)Best Price: $11.99 When using the All in One Bench Clamps these Tall Jaws give a good grip. I especially like them... |  Gross Stabil CKT 7-6 Edge ClampThe Gross Stabil CKT 7-6 Edge Clamp features a 2-1/4-inch throat depth and 2-3/4-inch nominal... |  Kreg PFC Face Clamps 3-1/4-Inch Premium Face ClampBest Price: $20.61 After reading all the negative comments, I was a little apprehensive about ordering this tool,... |  Clamp Assembly, Cam Action Clamp, Standard, Stud=1/2-13 (1 Each)Best Price: $78.47 Low profile quick action clamp. Jaw pivots forward and downward at the same time when the handle... |  De-Sta-Co Hydraulic Power Workholding, Hydraulic Edge Clamp, Hydraulic Pressure=500 - 3,500 (1 Each)For quick part load/unload in drilling, milling, planing, grinding and other surfacing... |
 Sink Bit 1/4" T-31 electroplated anchor x 3/8 ShankBest Price: $31.90 Standard Electroplated T-31 Bits |  24" Pro-Grip Solid Back To Back Edge Clamp By Peachtree Woodworking PW583The Back to Back Solid Clamp is two clamps in one extrusion which do not separate. Secure two... |  Omni Cubed Stealth Seamer Manual 8" cupsBest Price: $412.50 The Manual Stealth SeamerTM by Omni Cubed is the ultimate heavy-duty seam setter for joining and... |  Omni Cubed Pro-Cart AT1 All-Terrain Countertop Installation CartBest Price: $786.50 All-Terrain Countertop Installation Cart Don't settle for cheap imitations, get the... |  Omni Cubed Mega-Jaw Carry Clamp Set-2Best Price: $320.65 The Mega-JawTM Carry Clamp has been designed for easier and safer carrying of countertops. The... |
 Bessey 5-2 Double Spindle Edge ClampBest Price: $16.65 Ever glue up a large panel, hoping all the clamps and cauls around the outer edge would provide... |  PRO-GRIP 12" 180 DEGREE HANDLE CLAMP BY PEACHTREE WOODWORKING PW 564Best Price: $18.99 The 12" 180 degree triple cam lock lever rotates conveniently out of the way when using the... |  PRO-GRIP DRILL GUIDE KIT BY PEACHTREE WOODWORKING PW602Best Price: $17.99 Limitless control over hole center positioning, the possibilities are endless. Repetitive... |  PRO-GRIP HANDLE EXTENDER BY PEACHTREE WOODWORKING PW576Best Price: $5.99 The 7" long handle extender fits any PRO-Grip clamp. This extension gives you better... |  Fence Hardware Kit for Pro Grip Clamps By Peachtree Woodworking PW578Best Price: $29.99 Create your own fence for your bandsaw, router table or drill press. The fence hardware kit fits... |
 36" Pro-Grip Solid Back To Back Edge Clamp By Peachtree Woodworking PW585Best Price: $54.99 The Back to Back Solid Clamp is two clamps in one extrusion which do not separate. Secure two... |  Gator Clamps 410-24 24-Inch Clamp N CutBest Price: $26.37 I purchased and received this item a couple of weeks ago. The internal packaging was very light... |  Clamp Assembly, Cam Action Clamp, Extended, Stud=1/2-13 (Not included) (1 Each)Best Price: $83.71 Low profile quick action clamp. Jaw pivots forward and downward at the same time when the handle... |  2 Pack Bora 540950 50" Clamp-N-Cut Straight Edge ClampBest Price: $85.13 BORA Clamp-N-Cut edge guides are ideal for all types of woodworking, cabinet making and DIY... |  Set of 3 - 7" Pump Vacuum Suction Cup LiftersBest Price: $114.84 7" diameter vacuum pad and tough metal pump handle valve. Excellent for placing stone tiles... |
 PRO-GRIP UNIVERSAL FENCE BY PEACHTREE WOODWORKING PW606Best Price: $24.99 I was a little disappointed when this arrive because I expected it to come with a clamp. This... |  Bora 542001 Clamp Edge Wide Track Saw GuideBest Price: $29.99 Upon attempting to use this item only three letters come to mind....POS!!!! In the ads it is... |  Omni Cubed 4' Lam-ClampBest Price: $247.50 The Lam-ClampTM is a fabrication tool designed specifically for laminating natural and... |  All in One Clamp SB Stop Block w/ Micro AdjustmentBest Price: $15.95 I was a little shocked to see M. Lindley's scathing review. My experience with this Emerson... |  All in One Clamp U-54 54-Inch Ultra Wide Grip Clamp with Double T-TrackBest Price: $58.07 I can not begin to describe how well this clamping tool guide works. It is easily adjustable to... |
 Clamp Assembly, Cam Action Clamp, Standard, Stud=5/16-18 (1 Each)Best Price: $66.75 Low profile quick action clamp. Jaw pivots forward and downward at the same time when the handle... |  Clamp Assembly, Cam Action Clamp, Extended, Stud=5/16-18 (Not included) (1 Each)Best Price: $75.45 Low profile quick action clamp. Jaw pivots forward and downward at the same time when the handle... |  2 Pack Bora 540936 36" Clamp-N-Cut Straight Edge ClampBest Price: $59.10 BORA Clamp-N-Cut edge guides are ideal for all types of woodworking, cabinet making and DIY... |  Omni Pro Dolly Countertop Transport CartBest Price: $385.00 The Pro-Dolly provides easier transport and installation of countertops, and is especially... |  Omni Cubed 10" Lam-Clamp 10-Clamp SetBest Price: $412.50 The Lam-ClampTM is a fabrication tool designed specifically for laminating natural and... |
 All in One Clamp T-24 24-Inch Double Grip Bench Clamp with T-trackBest Price: $29.00 It may be an overused phrase, but the Emerson clamps are indeed the "best thing since... |  All in One Clamp U-99 99-Inch Ultra Wide Grip Clamp with Double T-TrackBest Price: $102.02 I can not begin to describe how well this clamping tool guide works. It is easily adjustable to... |  All in One Clamp Guides Package, Special Offer! While Supplies Last!Best Price: $69.99 NEW! Lower Profile! Finally, a series of clamping guides that don't get in the way of... |  Pro-Cart AT1 Multi-Top Accessory (Pairs)Best Price: $223.85 The Multi-Top Accessory enables transportation of multiple countertops simultaneously on the... |  Sink Bit 3/16" T-31 electroplated anchor 1/4" SHANKBest Price: $28.60 Standard Electroplated T-31 Bits |
 6 1/2" Locking Pliers - Straight Tip with ScissorsBest Price: $4.87 Excellent 'helping hand' when working with fine material - soldering, gluing,... |  Drill Press Fence ClampBest Price: $17.99 One 5/16" x 1" T-Bolt,One 1" Round 5/16"-18 Through Hole Knob, Drill Press... |  All in One Clamp I-24 24-Inch Scale (English) |  All in One Clamp XSP 9-Inch X 12-Inch Saw PlateI found this plate easy to mount as there is a built-in lip to clamp or hold your saw plate... |  Steelex W1301 Drill Press Clamp, 6-InchBest Price: $11.99 This "one press" drill press clamp adjusts quickly and easily to lock your work piece... |
 CL-TGJ2.524 - Bessey - BESSEY TRADESMEN CLAMP-24" OpeningBest Price: $15.84 BESSEY TRADESMEN CLAMP-24" Opening |  JORGENSEN EDGE CLAMPThe Jorgensen 641 edge clamp is designed just for that, clamping edges. It is near 9" in... |  ANCHORS 10-24 100PackBest Price: $15.02 Used for anchoring after cutting the anchoring slots with T-31 bits. |  Bessey 5-1XXX Edge ClampBest Price: $12.30 So this edge clamp adaptor looks like something put together as an afterthought. Don't be... |  XRP 8-Inch by 9-Inch Router Plate, BlackBest Price: $26.50 I've used the 50" clamp for a year, and recently purchased the plates. They are a two... |
Tools and Hardware