 |
 |
List Price: $879.00 Our Price: $679.00 You Save: $200.00 (23%) Availability: Usually ships in 1-2 business days Category: Tools See more product details
|
Product DetailsManufacturer: Fuji Industrial Spray Equipment Model: 2904 Product features: - Portable and powerful paint spray gun system for professional-grade coating on metal or wood
- Offers enough pressure to spray all types of coatings including water-based
- Extra powerful 4-stage Ametek HVLP turbine
- Non-bleed XT-2 spray gun with 1-quart pressure-feed cup
- Includes 25-foot hose with air control valve; high-efficiency air cap
Tools and Hardware Reviews of Fuji 2904 Mini-Mite 4-Stage HVLP Spray SystemCustomer Review: Amazing results with a small price Summary: 5 Stars
I bought this unit when Amazon had their 20% off sale. It is the same thing as the Q-4 PRO Quiet version, same motor, same fan, gun and hose except you save over $200! It says the PRO is much quieter. Yes it may be but the MINI is not that noisy, about the same as a shop-vac. Besides, I made the mistake of putting the fan unit inside my spray booth (read garage) and got atomized finish all over the motor unit. I tried to clean the unit with solvents and the logo dissolved right off - what a mess! Not to mention the sponge filter clogs much faster, because it's trying to suck in dirty air. Now I put the unit outside the garage where the air is clean and if I shut the door half way, I don't hear the unit that much.
As far as the sprayer goes, it's construction is solid and performs well. Much better than the mid level HVLP conversion (compressor) sprayer I used to use. The conversion gun required so many adjustments to get the desired flow, it was purely a frustrating experience. Each time I use the darned thing I get inconsistent results. Lord knows how many times I had to sand down to bare wood so I can re-finish the work again and again (read angry clients).
With the MINI-MITE 4 all I do is fill it with the material, turn one nozzle to fine tune, test and spray away. Now I can spend more time on spraying than setting up the gun. For easy clean up I line the cup with a zip-lock sandwich bag (make sure your finish material and cleaning solvent does not dissolve the plastic bag, also make sure the lid lock is cranked tight to ensure no leakage). Any remaining material left over can be soaked with paper towel, zipped and tossed. Line again with zip lock, put some cleaning solvent and clean the gun. Zip, toss and you're done. To further ease clean up I covered the hose with a plastic sleeve. The local hardware store sells poly-vinyl sleeves for plumbing??? for about $.42 a foot. Snake the hose through the plastic and tape the ends. Done, no more messy finish on the hose.
Get this unit you will love it. Not only that, you will never go back to conversion HVLPs any more.
Note: if you are looking at the 3 stage units, pay a few extra and get the 4 stage you will not regret it.
Description of Fuji 2904 Mini-Mite 4-Stage HVLP Spray SystemThe Mini-Mite 4 system includes all the same features as the Mini-Mite 3 model. The MM4 now includes the new Fuji XPC spray gun that features a pattern control knob to adjust the fan size from small round to large. Fuji installs the same powerful 4-stage turbine motor as used in the Super 4 and Q4 models. The Mini-Mite 4 (MM4) does not have the patented noise-reduction feature as seen on the Fuji Super and Q-Series, however the noise level is no more than any other standard HVLP turbine. The MM4 turbine develops approximately 8psi. This allows for less thinning of paints than any 3-stage model. More than enough pressure to spray all known coatings (When properly thinned) and all the newer water-based coatings. The spray gun included is the XPC with 1 qt cup. The standard air cap set is the general purpose #4 for fine finishing. Easy to maintain. Perfect for professional or beginner. This The Fuji mini-mite 4X paint spray gun system is a portable kit ideal for cabinet makers, furniture refurbishers, auto detailers, or anyone who wants professional-grade painting and coating for their wood or metal work; the extra powerful 4-stage Ametek HVLP turbine gives you enough pressure to spray all types of coating (when properly thinned), including water-based coatings. This system includes the XT-2 spray gun, featuring a non-bleed design for reduced disturbance of shop dust and durable all stainless steel fluid components. The spray gun comes with a high-efficiency air cap which helps reduce over-spray and a 1-quart pressure-feed cup, and a convenient 25-foot hose with air control valve. What's in the Box XT-2 spray gun, 4-stage HVLP turbine, high-efficiency air cap, and 25-foot hose.
Paint Sprayers Tools
|
 |
|
|
|