Hydraulic Horizontal Vertical Cutting Metal Bandsaw W/stand
by Generic
 |
Our Price: $479.99 Availability: Usually ships in 1-2 business days Category: Tools See more product details |
Product Details
Manufacturer: GenericProduct features:
- Hydraulic Down-Feed with Auto Shut-Off!
- Adjustable Hydraulic Down-Feed
- Quick-Release Vise for Rapid Change out of work piece
- Blade included
Tools and Hardware Reviews of Hydraulic Horizontal Vertical Cutting Metal Bandsaw W/stand
Customer Review: Beautiful Piece of Junk
Summary: 1 Stars
This is certainly a beautiful piece of junk. First of all some screws were missing. Then, when going to mount the saw to the stand, you can only put three bolts in. The fourth does not line up--you can barely see the corner of the hole. The handle was broken for the vise. The vise does not work properly. The bottom of the motor was rubbing and had to be removed and bent out. We could not lift the saw up as it was rusted and frozen, so we had to spray WD-40 on the hinge until finally it released. After all of this, it was discovered it did not have enough power to cut even soft aluminum or a small piece of steel. The saw was taken to a shop that repairs electrical motors and found that the motor could easily be stopped by hand--it had no power whatsoever. Therefore the motor must be defective as it is the same motor used and sold on other saws. I was just lucky enough to get one that is defective. The supplier has without hesitation offered a 100% refund--the problem is the thing came strapped on a crate, and weighs several hundred pounds. It would cost another $300.00 to ship it back to California as shipping is not covered under the warranty. I am extremely disappointed--if you want a Chinese band saw, buy it from Habor Freight or someplace you can return it. I was expecting a much better saw.
Update: I spent $250.00 for a brand new motor--the saw now works but not very well. I still classify it as an absolute piece of junk which I took a severe loss on.
Description of Hydraulic Horizontal Vertical Cutting Metal Bandsaw W/stand
-Design Type: Floor Model -Saw Body: 942mm x 442mm x548mm -Floor Stand (mobile): 642mm x 442mm x 245mm -Max Cutting Capacity at 0 degrees: 4" Round 4" x 6" Rectangular -Max Cutting Capacity at 45 degrees R:3 3/4" Round, 3 3/4" x 3" Rectangular -Max Cutting Capacity at 60 degrees L: 2" Round, 2" x 3/16" Rectangular -Angle Cuts: 45 degrees R - 60 degrees L -Blade Size: 1/2" x 64 1/2" -Blade Speeds: 90, 130, 210 FPM -Main Body Construction: Cast Iron -Stand Construction: Formed and Welded Steel -Motor Type: TEFC Capacitor Start Induction Run -HP: Input: 3/4 HP, Output 1/3 HP -Phase/Cycle: Single Phase/60Hz -RPM:1720 -Bearings: Shielded and Lubricated Ball Bearings -Switch: Auto Shut OffBand Saws Tools
Tools and Hardware
Bestsellers in Band Saws Tools
Wilton 8201VS Variable Speed Wood and Metal Cutting Vertical Bandsaw,Wilton; Tools
Grizzly G0614 6" x 9-1/ 2" Swivel Metal-Cutting BandsawGrizzly; Tools
Best price: $1,895.00
Wilton 3130 5" x 8" Horizontal Bandsaw - Dry Metal Cutting, 1/ 2HP, 1PH, 115VWilton; Tools
Stout ST-CS250 portable cutting station bandsaw baseStout; Tools
Wilton 7040M 10-Inch 1-1/ 2 Horsepower Miter Metalworking Bandsaw, 230-Volt 3 PhaseWMH Tool Group; Tools
DEWALT D28770K 6 Amp 4-3/ 4-Inch-by-4-3/ 4-Inch Capacity 80 to 280 Feet Per Minute Variable Speed Portable Band Saw with CaseDEWALT; Tools
Best price: $319.00
Price in other shops:
Delta 28-248 14-Inch 1-1/ 2 Horsepower Woodworking Band Saw, 115-Volt, 1 PhaseDelta; Tools
Price in other shops:
Grizzly G0555 The Ultimate 14" BandsawGrizzly; Tools
Best price: $525.00
JET 708115K JWBS-14CS 14-Inch 1 Horsepower Woodworking Bandsaw with Graphite Guide Blocks, 115/ 230-Volt 1 PhaseJET; Tools
Best price: $699.99
Price in other shops:
JET 414459 HVBS-7MW 7-Inch 3/ 4-HP Horizontal/ Vertical Bandsaw, 115/ 230-Volt 1-PhaseJET; Tools
Price in other shops: