 |
HM Digital Pocket Size TDS Meter TDS-4 Water Quality Tester by HM Digital
 |
List Price: $35.00 Our Price: $20.99 You Save: $14.01 (40%) Availability: Usually ships in 24 hours Category: Home See more product details
|
Product DetailsManufacturer: HM Digital Brand: HM Digital Edition: Kitchen Model: TDS-4 Publisher: HM Digital Studio: HM Digital Music Label: HM Digital Product features: - The smallest and lightest TDS meter on the market.
- Advanced microprocessor technology.
- Hold Function: saves measurements for convenient reading and recording.
- Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries.
- Measurement Range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1 ppm. Large and easy-to-read LCD screen
Tools and Hardware Reviews of HM Digital Pocket Size TDS Meter TDS-4 Water Quality TesterCustomer Review: TDS-4 Water Quality Tester HM Pocket Meter Summary: 5 Stars
Very good product. Simple to apply. Tested faucet water at the home of my elderly in-laws and compared it to the Saratoga Springs water they use. We discovered a vast difference in meter readings between the two. I then filtered their faucet water through a Brita cartridge I purchased for them. I was surprised when the Brita filtrated water turned out a lower ppm reading than the Saratoga Springs water. My father in-law, who is over 85 yrs of age, no longer has to make a trip to the Springs to acquire his drinking water during cold winter months anymore. That same week, I tested distilled water from a bottle purchased at the grocery store and expected to see a zero reading on the meter. Instead, it consistently read 100 ppm, which surprised me. I would imagine it is due to the plastic bottle. I then tested standard bottled drinking water from a newly opened plastic bottle and it too read 100 ppm; no better than distilled bottled water. I'm very satisfied with this TDS-4 water testing instrument thus far.
Description of HM Digital Pocket Size TDS Meter TDS-4 Water Quality TesterTDS Meter - Tester To Test For Total Disolved Solids In Water - Reverse Osmosis Membrane Tester The Only Way To Know If Your Reverse Osmosis RO Membrane Is Performing Correctly - Tests for TDS - Total Dissolved Solids. A Must For All RO System Owners. Compare Incoming Feed Water To Treated Water - Replace Membrane If Less Than 80% of TDS Is Being Removed - Total dissolved solids (TDS) are the total weight of all solids (minerals, salts or metals) that are dissolved in a given volume of water expressed in milligrams per liter (mg/L), or in parts per million (PPM). The lower the TDS level in the water, the more efficiently your body's cells actually get hydrated by the water that you drink. The higher the TDS levels in the water, the greater the probability of harmful contaminants that can pose health risks or hinder the absorption of water molecules on the cellular level. 17 PPM of TDS = 1 grain of hardness. Hold Function: saves measurements for convenient reading and recording. Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries. Measurement Range: 0-9990ppm. From 0-999ppm, the resolution is in increments of 1ppm. From 1,000 to 9,990ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image. Display: large and easy-to-read LCD screen. Factory Calibrated: recalibration is not necessary, but can be done easily with a watch screwdriver. There's no need for messy solutions to initially calibrate the meter. Range: 0 - 9990ppm (mg/L) Accuracy: +/- 2% ATC: Built-in sensor for Automatic Temperature Compensation of 1 to 50 degrees Celsius (33 to 122 degrees Farenheit) Power source: 2 x 1.5V button cell batteries (included) Battery life: over 1,000 hours of continuous use Dimensions: 14 x 2.3 x 1.5cm (5.5 x .9 x .55 inches) Weight: 32g (1.13 oz) We really like this tester and think that anyone who wants to know about the quality of their water should have one of these TDS Meter Testers.
Water Coolers & Filters
|
 |
|
|
|