 |
FastCap Little Hand HD 3rd Hand Support System, Set of 2, 16.5-Inch to 22.8-Inch by Laserjamb
Product DetailsManufacturer: Laserjamb Model: 3HAND14 Product features: - Range of 16.5 to 22.8 inches
- Action lever for secure pressure, with quick release
- Fully articulated ends
- Textured rubber pads for gripping
- Includes 2 supports
Accessories:
Tools and Hardware Reviews of FastCap Little Hand HD 3rd Hand Support System, Set of 2, 16.5-Inch to 22.8-InchCustomer Review: Kitchen cabinet replacement made easier. Summary: 5 Stars
Replacing kitchen cabinets used to be a team effort, but with the right tool, one can actually work alone. Used specifically to replace the upper cabinets, the job followed this order. First, I used the jacks to aid in the removal of the old upper cabinets, utilizing the existing counter top on the lowers units for support. Holding the cabinets steady, I was able to remove the mounting screws alone. The old stove and frig. were also used with some risers (made from scrap lumber) to remove the odd cabinets. By placing the jacks at the FRONT edge of the cabinets, the lifting pressure automatically holds the cabinets against the wall. I removed them one unit at a time until clear. Leaving the lowers in place, it is now time to install the NEW uppers, using the same process in reverse. One could actually replace one upper unit at a time, but as my design called for differing dimensions, I removed all the old uppers first. While the walls were bare, I marked the stud locations for fastening. While the jacks hold the cabinet for you, get the unit square and level, and drive the mounting screws. Once all the uppers are in, put the jacks away, and swap out the lower cabinets.
This great tool saved time and effort, and yeilded flawless results.
Measuring & Layout Tools
|
 |
|
|
|