Milescraft 1407 D/TFeatherBoard Dual or Tandem FeatherBoards for Router Tables and Table or Band Saws
by Milescraft Inc.
 |
List Price: Our Price: $21.28 You Save: $8.71 (29%) Availability: Usually ships in 1-2 business days Category: Tools See more product details |
Product Details
Manufacturer: Milescraft Inc.Model: 1407
Product features:
- Mounting Hardware Included for nearly any dual or tandem application - 3/4-Inch and 5/8-Inch wide miter bars and t-slot bolts fit most table and band saws, router tables, and fences
- Includes sturdy spacer for tandem FeatherBoard operations
- Dual Slide Motion - Side to side and forward action for quick and easy setup
- Unique Pre-Load Tension Design - Quickly set tension for consistent cuts while reducing the chance of kick-back
- Split rail miter bar construction - Provides maximum hold
- This Old House
- Creating a New Old House: Yesterday's Character for Today's Home (American Institute Architects)
Tools and Hardware Reviews of Milescraft 1407 D/TFeatherBoard Dual or Tandem FeatherBoards for Router Tables and Table or Band Saws
Customer Review: Works well, could be better
Summary: 3 Stars
I needed a set of feather boards to help me rip some pine 4x4's down to 2-3/4". I decided on these because they come with two sizes of miter tracks, and I needed the 5/8" size to fit my benchtop table saw. The two other feather board companies I considered (Rockler & Kreg) offered only 3/4" bars.
Some reviewers noted that the bars were too wide. I took a chance anyway, and fortunately they fit (at least the 5/8" bars). The feather board plastic material is stiff, but worked well enough for its intended purpose. Stacking the two boards is done by screwing them onto a spacer. However, because there are no metal inserts, the screws will bite into the plastic spacer material when first used, so if you plan to frequently alternate between single/dual use, make sure not to strip the thread pattern by over tightening or cross threading.
When ripping the 4x4's, I stacked the feather boards, and noted that the unit as a whole tends to wobble after awhile so that the top fingers will not maintain the same pressure as the lower set. I had to periodically adjust and tighten the unit. Your experience may differ depending on the fit/tolerance of your miter slots (or how much your particular saw vibrates, in my case).
I also used them in single mode, and have no complaints there. They locked well and supported the work piece firmly.
More Milescraft 1407 D/TFeatherBoard Dual or Tandem FeatherBoards for Router Tables and Table or Band Saws Customer Reviews:
1 2 3 4 5
1 2 3 4 5
Description of Milescraft 1407 D/TFeatherBoard Dual or Tandem FeatherBoards for Router Tables and Table or Band Saws
The Milescraft Model 1407 D/TFeatherBoard has the dual slide motion and unique pre-load tension design features of the 1406 FeatherBoard and includes a sturdy spacer for tall stock cutting operations. The D/TFeatherBoard includes two 3/4-Inch and two 5/8-Inch miter bars as well as four T-Slot bolts allowing it to be used as either dual OR tandem feather boards in nearly any application on router tables and table or band saws.Jigs Tools
Tools and Hardware
Bestsellers in Jigs Tools
Kreg SML-F125-1000 1 1/ 4-Inch No. 7 Fine Pocket Hole Screws with Washer-Head, 1000-PackKreg; Tools
Best price: $11.29
Price in other shops:
Kreg SML-C150-500 Pocket Hole Screws 1-1/ 2-Inch #8 Coarse Washer-Head 500ctKreg; Tools
Best price: $12.95
Price in other shops:
Kreg KMS7800 Solid Production StopKreg; Tools
Best price: $16.49
Price in other shops:
Kreg KMS7727 4 Non-Adhesive Measuring Tape (Left-Right Reading)Kreg; Tools
Best price: $4.99
Wal-Board Tools 08-001 16" Drywall Circle Cutter - Cuts up to 16" Diameter (AC-31)Wal-Board Tools; Tools
Best price: $6.35
Shop Fox D3171 Shelf Support Boring JigShop Fox; Tools
Best price: $14.99
Price in other shops:
Porter-Cable 51102 Maximum Security Mortiser 1-1/ 8-Inch x 2-3/ 4-InchPorter-Cable; Tools
Best price: $49.95
Porter Cable 5507 9/ 64-Inch Pilot Hole Bit for 552 Production Pocket CutterPorter-Cable; Tools
Best price: $10.00
Price in other shops:
Porter Cable 5503 7/ 64IN EXT LONG BITSPorter Cable; Tools
Price in other shops:
General Tool 840 Pro Doweling KitGeneral Tools; Tools
Best price: $21.95
Price in other shops:
Similar Tools and Hardware Products
Bosch RA1054 Deluxe Router Edge Guide With Dust Extraction Hood & Vacuum Hose AdapterBosch; Tools
Best price: $38.18
Price in other shops:
MSI-PRO 225-D 51120 Horizontal Quick-Release Toggle ClampsMSI; Tools
Best price: $3.99
INCRA Build-It Hold Down ClampIncra; Tools
Best price: $10.88
Price in other shops:
Kreg KHC-RAC Right Angle ClampKreg; Tools
Best price: $21.99
Price in other shops:
Bench Dog 10-035 Bench Cookie Work Grippers, 4-PackBench Dog; Tools
Best price: $10.49
Price in other shops:
INCRA Build-It Knobs, 1/ 4-20 by 1-1/ 2-Inch Bolts, Washers, Set of 8Incra; Tools
Best price: $10.98
Woodstock W1044 4-to-2-1/ 2-Inch ReducerWOODSTOCK; Tools
Best price: $1.25
Price in other shops:
Milescraft 3402 PushStick and Depth Gage for Router Tables and Table SawsMilescraft Inc.; Tools
Best price: $12.18
Price in other shops:
MLCS 9167 Safety Push Block and 5-Piece Stick PackageMLCS; Tools
Best price: $24.23
Price in other shops:
Milescraft 1406 FeatherBoard for Router Tables, Table Saws and FencesMilescraft Inc.; Tools
Best price: $10.80
Price in other shops: