| ||||
 13/32" High Speed Steel Spiral Fl Hand ReamerBest Price: $25.40 |  7/16" High Speed Steel Spiral Fl Hand ReamerBest Price: $24.90 |  7/8" High Speed Steel Spiral Fl Hand ReamerBest Price: $45.60 |  1 1/16" High Speed Steel Spiral Fl Hand ReamerBest Price: $68.80 |  7/32" High Speed Steel St. Fl Hand ReamerBest Price: $15.30 High speed steel. Straight flute hand reamer. |
 1/4" High Speed Steel St. Fl Hand ReamerBest Price: $16.50 High speed steel. Straight flute hand reamer. |  35/64" 5C ColletBest Price: $5.75 They are also used on lathes in 5C collet chucks. Available accessories include collet stops,... |  VME 5CC-6 6" 5C Step Chuck (or Clutch Collet)Best Price: $54.00 Invaluable for holding extra large work up to 5" diameter for a limited depth. Heat treated... |  13 MM 5C Round ColletBest Price: $17.60 Round 5C collets to hold metric diameters. |  23/64" 5C ColletBest Price: $5.75 They are also used on lathes in 5C collet chucks. Available accessories include collet stops,... |
 27/64" 5C ColletBest Price: $5.75 They are also used on lathes in 5C collet chucks. Available accessories include collet stops,... |  26 MM 5C Round ColletBest Price: $17.60 Round 5C collets to hold metric diameters. |  3/16" 5C ColletBest Price: $5.75 They are also used on lathes in 5C collet chucks. Available accessories include collet stops,... |  27/32" R-8 ColletBest Price: $5.75 Round R8 collets for Bridgeport(r) and similar vertical milling machines. |  1/8" R-8 ColletBest Price: $5.75 Round R8 collets for Bridgeport(r) and similar vertical milling machines. |
 15/32" R-8 ColletBest Price: $5.75 Round R8 collets for Bridgeport(r) and similar vertical milling machines. |  VME BH-4 4" Boring Hd with 1 1/2"-18 Threaded BackBest Price: $135.00 Quality Import. Order shanks separately. Greduated in .001" |  APT BH-34A 2" Boring Head w/ Integral 3/4" Shank Made in USABest Price: $114.00 Made in USA by APT. Direct reading in .001". Precision hardened steel construction |  1-1/4" R-8 End Mill AdapterBest Price: $26.00 For holding end mills in Bridgeport(r) and similar vertical Milling Machines. End mill is held... |  5/8" Carbide Tipped Boring BarBest Price: $5.00 For steel and steel alloys. All shanks ground to +.0"-.0010". Designed so that the... |
 2 Flute End Mill, 1-1/2" Cut Dia, 1-1/4" Shank, 1-5/8" Cut Length, Niagara Cutter 204872 Flute HSS End Mill S203 Single-End, Center-Cutting Niagara Cutter 20487. Specifications: 1... |  3/4" Carbide Tipped Boring BarBest Price: $7.50 For steel and steel alloys. All shanks ground to +.0"-.0010". Designed so that the... |  3" Plain Vee Blocks - PairBest Price: $13.00 Matched pairs. Made from quality castings. |  4 1/8" Precision Vee BlocksBest Price: $79.00 Made of hardened tool steel in matched pairs. Each block includes reversible, swing-away clamp.... |  VME AP-306 0 X 8 X 6 Open Angle PlateBest Price: $73.00 Made from High Quality Seasoned Castings. Accurate to .002" in 5". Open end (no ribs),... |
 Fine Adj. Magnetic BaseBest Price: $16.95 Dial Indicator Holders. With ON/OFF switch. Universal arm to hold all types of indicators.... |  VME EF-133 Single End Edge FinderBest Price: $4.50 Hardened and ground all over. Accurately locates the starting point for all type of machine work... |  13/32" High Speed Steel St. Fl Hand ReamerBest Price: $23.90 High speed steel. Straight flute hand reamer. |  5/16" High Speed Steel Spiral Fl Hand ReamerBest Price: $19.90 |  19 MM 5C Round ColletBest Price: $17.60 Round 5C collets to hold metric diameters. |
 1" R-8 End Mill AdapterBest Price: $20.50 For holding end mills in Bridgeport(r) and similar vertical Milling Machines. End mill is held... |  1/2" R-8 ColletBest Price: $5.75 Round R8 collets for Bridgeport(r) and similar vertical milling machines. |  VME 3/4" Straight - 7/8-20 Boring Head ShankBest Price: $15.98 Shank to mount a boring head that has a 7/8-20 thread. |  25/32" R-8 ColletBest Price: $5.75 Round R8 collets for Bridgeport(r) and similar vertical milling machines. |  VME 3MT (Tang)- 1-1/2-18 Boring Head ShankBest Price: $24.00 Shank to mount a boring head that has a 1-1/2-18 thread. The Morse Taper end is Tang Style. |
 Pair of 1" x 2" x 3" BlocksBest Price: $11.25 Just received these today, and immediately inspected them. For the price, I expected to find... |  ACCURA / VERTEX 8" horizontal/vertical rotary table new in boxBest Price: $349.99 This high quality ritary table is not to be confused with cheaper, lesser quality Chinese... |  ACCURA/VERTEX 5" tilting angle milling vise NEWThis is a high quality shop worthy Taiwanese import tilting angle milling machine vise, It is... |  17/32" High Speed Steel Spiral Fl Hand ReamerBest Price: $31.20 | 23/64" 5C Collet Best Price: $5.75 They are also used on lathes in 5C collet chucks. Available accessories include collet stops,... |
| 27/64" 5C Collet Best Price: $5.75 They are also used on lathes in 5C collet chucks. Available accessories include collet stops,... | 26 MM 5C Round Collet Best Price: $17.60 Round 5C collets to hold metric diameters. | 3/16" 5C Collet Best Price: $5.75 They are also used on lathes in 5C collet chucks. Available accessories include collet stops,... | 27/32" R-8 Collet Best Price: $5.75 Round R8 collets for Bridgeport(r) and similar vertical milling machines. | 1/8" R-8 Collet Best Price: $5.75 Round R8 collets for Bridgeport(r) and similar vertical milling machines. |
| 15/32" R-8 Collet Best Price: $5.75 Round R8 collets for Bridgeport(r) and similar vertical milling machines. | VME BH-4 4" Boring Hd with 1 1/2"-18 Threaded Back Best Price: $135.00 Quality Import. Order shanks separately. Greduated in .001" | APT BH-34A 2" Boring Head w/ Integral 3/4" Shank Made in USA Best Price: $114.00 Made in USA by APT. Direct reading in .001". Precision hardened steel construction | 1-1/4" R-8 End Mill Adapter Best Price: $26.00 For holding end mills in Bridgeport(r) and similar vertical Milling Machines. End mill is held... |  MaxiFlex 1/2 Hose Double Nipple Segment 1/2Best Price: $6.84 Double male socket for the 1/2" MaxiFlex Coolant Hose, which provides direct delivery of... |
 MaxiFlex 1/2 Hose Straight Hole Nozzle 30mm, Wiha 34008Best Price: $8.20 This flat nozzle for the 1/2" MaxiFlex Coolant Hose is 300mm wide and features multiple... |  MaxiFlex 1/4 Hose Thread Connect R 1/4Best Price: $4.22 This is a NPT 1/4" threaded connector for the 1/4" MaxiFlex Coolant Hose, which... |  CP2002_2W Filtration Systems, Bag and Cartridge, for Water Based Machine CoolantsCP2002-2W - Filtration Systems, Bag and Cartridge, for Water Based Machine Coolants. Full System... |  4 Flute End Mill, 15/32" Cut Dia, 3/8" Shank, 1-1/2" Cut Length, Niagara Cutter 36151Multi Flute HSS End Mill S404 Single-End, Non-Center Cut Niagara Cutter 36151. Specifications: 4... |  VME BBCA-1/2-S 1/2" Shank 9 Piece Carbide Tip Boring Bar SetBest Price: $22.25 Grade C6 for steel and steel alloys. Designed so that the same bar can bore flat bottomed holes... |
 2 Flute End Mill, 1-7/8" Cut Dia, 1-1/4" Shank, 1-5/8" Cut Length, Niagara Cutter 206072 Flute HSS End Mill S203 Single-End, Center-Cutting Niagara Cutter 20607. Specifications: 1... |  019347213 ABB END SECT FOR H35/16 F |  3/4" Carbide Tipped Boring BarBest Price: $8.00 For steel and steel alloys. All shanks ground to +.0"-.0010". Designed so that the... |  3/8" Carbide Tipped Boring BarBest Price: $2.50 For steel and steel alloys. All shanks ground to +.0"-.0010". Designed so that the... |  APT BH-34B 2-1/2" Boring Head w/ Integral 3/4" Shank Made in USABest Price: $137.00 Made in USA by APT. Direct reading in .001". Precision hardened steel construction |
 5/32" R-8 ColletBest Price: $5.75 Round R8 collets for Bridgeport(r) and similar vertical milling machines. |  VME BH-2 2" Boring Head with 7/8"-20 Threaded BackBest Price: $39.99 Quality Import. Order shanks separately or order our sets including popular shank and a boring... |  APT BH-R8B 2-1/2" Boring Head w/ Integral R8 Shank Made in USABest Price: $183.00 Made in USA by APT. Direct reading in .001". Precision hardened steel construction |  VERTEX HORIZONTAL VERTICAL 4" Rotary Table.Best Price: $239.99 VERTEX HV-4 4"ROTARY TABLE This table is made of high density Meehanite, and is... |  ARTB-8 VERTEX HV-8 8" H/V Rotary Table. WITH ACCESSORIES PACKAGE Tailstock, Dividing PlatesBest Price: $605.00 ARTB-8 VERTEX HV-8 8" H/V Rotary Table. WITH ACCESSORIES PACKAGE Tailstock, Dividing Plates... |
 9/16"-18 Heimann Transfer Screw SetBest Price: $13.75 Set consists of 6 hardened screws and is nested in a combined holder and wrench as illustrated... |  MaxiFlex 1/4 Hose 1/16 Nozzle 90deg Bend, Wiha 34414Best Price: $4.54 1/16" 90 degree nozzle for the 1/4" MaxiFlex Coolant Hose, which provides direct... |  MaxiFlex 1/2 Hose 1/2 Segment Clamp, Wiha 34048Best Price: $5.88 1/2" pipe segment clamp for the 1/2" MaxiFlex Coolant Hsoe, which provides direct... |  VME AP-204 8 X 6 X 5 Web Angle PlateBest Price: $39.90 Made from High Quality Seasoned Castings. Accurate to .002" in 5". Webbed-End.... |  5 1/2" Universal Right Angle IronStress is relieved against distortion by annealing after natural seasoning. Accurately Machined.... |
 Magnetic Base - Plain ArmBest Price: $17.50 Dial Indicator Holders. With ON/OFF switch. Universal arm to hold all types of indicators.... |  9/16" High Speed Steel Sp Fl Hand Exp ReamerBest Price: $53.00 H.S. Spiral Flute. Recommended expansion limits: 1/4" - 21/32": .010" ;... |  VME EF-132 Double End Edge FinderBest Price: $5.00 Hardened and ground all over. Accurately locates the starting point for all type of machine work... |  1" High Speed Steel Sp Fl Hand Exp ReamerBest Price: $108.50 H.S. Spiral Flute. Recommended expansion limits: 1/4" - 21/32": .010" ;... |  1 7/8" High Speed Steel Sp Fl Hand Exp ReamerBest Price: $328.00 H.S. Spiral Flute. Recommended expansion limits: 1/4" - 21/32": .010" ;... |
 1 1/16" High Speed Steel St. Fl Hand ReamerBest Price: $53.10 High speed steel. Straight flute hand reamer. |  13/32" Carbon Steel Hand ReamerBest Price: $6.00 Carbon steel. Straight flute hand reamer (Spiral flute may be substituted) Made in USA.... |  11/16" 5C ColletBest Price: $5.75 They are also used on lathes in 5C collet chucks. Available accessories include collet stops,... |  VME 5C-X4 .750" - 1.937" Expanding 5C ColletBest Price: $23.50 Insert expanding collet in spindle and adjust collet closer (like any 5C Collet) until expansion... |  9/16" Hex 5C ColletBest Price: $17.50 Holds hexagonal (6 sided) work pieces. |
 VME 5C-X2 .437" - .800" Expanding 5C ColletBest Price: $23.50 Insert expanding collet in spindle and adjust collet closer (like any 5C Collet) until expansion... |  9/64" 5C ColletBest Price: $5.75 They are also used on lathes in 5C collet chucks. Available accessories include collet stops,... |  VME 5C-CS 5C Collet StopBest Price: $5.50 Hardened black oxide finish, with full milled Hex end. Uses threaded rod or screws for stop. Has... |  VME BH-2M 2" Metric Boring Head with 7/8"-20 Threaded BackBest Price: $62.50 BH-2M is graduated in .01mm. |  Set: 9 R8 End Mill Arbors, 3/16"-1 1/2"Best Price: $159.00 For holding end mills in Bridgeport(r) and similar vertical Milling Machines. End mill is held... |
 7/32" R-8 ColletBest Price: $5.75 Round R8 collets for Bridgeport(r) and similar vertical milling machines. |  R8 to 4 Jacobs Taper Drill Chuck ArborBest Price: $13.00 For Bridgeports and similar vertical milling machines. Quality Import. |  11/16" High Speed Steel Spiral Fl Hand ReamerBest Price: $36.40 |  3/4" High Speed Steel Spiral Fl Hand ReamerBest Price: $38.50 |  Accurate Mfg Z7000 5/16 x 5/32 Swivel JointBest Price: $11.00 For clamping indicators & other instruments |
 Accurate Mfg Z7004 3/8 x 1/4 Swivel JointBest Price: $11.00 For clamping indicators & other instruments |  Accurate Mfg Z9367 1/2" Flat Anvil Indicator PointBest Price: $6.00 Standard 4-48 thread fits on all AGD standard indicators and on caliper clamp-on jaw accessory... |  7 MM 5C Round ColletBest Price: $17.60 Round 5C collets to hold metric diameters. |  25/64" 5C ColletBest Price: $5.75 They are also used on lathes in 5C collet chucks. Available accessories include collet stops,... |  VME 5C-SQCB 5C Square Collet Block with Ring CloserBest Price: $24.90 For fast, short run, set-ups. Perfect for 90 Degree grinding or milling on parallel flats,... |
 VME 5C-CB 5C Collet Block Set - Hex Collet Block, Square Collet Block and Collet CloserBest Price: $44.25 High quality, well made, safely packaged and reasonably priced. Shipping was VERY fast! As... |  3/8" Square 5C ColletBest Price: $17.50 Holds square work pieces. | |||
Tools and Hardware