Oneway Wolverine Grinding Jig
by ONEWAY MANUFACTURING
 |
List Price: Our Price: $84.99 Availability: Usually ships in 1-2 business days Category: Tools See more product details |
Product Details
Manufacturer: ONEWAY MANUFACTURINGModel: 2291
Product features:
- Save Time, Money and Frustration
- Furnished with Two Bases
- The " V" arm attachment is 27" in Length
- THe 3" x 5" Platform jig uses Quick Release Ratchet handles
- Comes complete with Instructions for Installation and Use
Tools and Hardware Reviews of Oneway Wolverine Grinding Jig
Customer Review: Wolverine system
Summary: 5 Stars
I purchased this system after failing to sharpen my turning tools by free hand on my 8" grinder, it was a little pricy, but just like another reviewer, I spend around $40 to sharpen them, so it will pay for itself in just a few sharpening sessions. The system does work very well, but I want to share my experiences on mounting the system in this review. I chose to build a small table that would hold the system and nothing else, so I choose a (larger than needed) 20" x 30" area to mount it on. I purchased the basic system and added the diamond dresser and the skew attachment, I must have not looked at the pictures very closely and mounted the grinder and the clamping attachments in the middle of the table. Everything fit with the exception of the diamond dresser, it needs the system to be on the edge of the work surface, I finally decided to move everything to the edge, after spending many hours getting it mounted perfect in the middle of the table, and that did the trick, all the tools will now work with the wolverine. I did also find that to attain the required 6.5" needed from the table top to the middle of the gringing wheel, can be attained using a 3/4" or 1" piece of material, 1" of material will bring it to the max of 6.5". Mounting the clamping device required it to be placed flush with the frount of the wheel and on the centerline of the wheel. I used a square and held it up from the table to the wheel and that gave me the edge mark. to find the centerline of the wheel I used the square again, marked the center of the wheel, placed the square up against the mark and transferred it to the table top. Finally I'm not sure if the directions told you what size of wood screws to use with the clamping devices, but I used a #10 wood screw and it fit perfectly, 3 on each side (I did find that the middle screw hole is centered on the grinder wheel, so getting it in with the grinder attached will be a challange, I had to remove the grinder to get the middle screws in on both sides. Hope this helps anyone in their setup, thanks OneWay for a great system, and Amazon for a great price.
Description of Oneway Wolverine Grinding Jig
Wolverine Grinding Jig will save you time, frustration and money by allowing you to grind tools right the first time and every time. Youll create accurate cutting angles and straight edges in a fraction of the time it now takes and your tools will be easier and safer to work with! The Wolverine system is furnished with two bases, one to mount under each wheel, which permit two simultaneous grinding set ups. Each base accepts either sliding arm. Arms are effortlessly adjusted or secured by a cam locking device. The V arm attachment is 27" in length and is perfect for sharpening gouges, skews, chisels, or carving tools. Just pull the arm out until the tool rests on the wheel at the proper angle and youre ready to start. The 3" x 5" platform jig uses quick release ratchet handles for angle adjustments and is perfect for sharpening scrapers. Wolverine comes complete with instructions for installation and use.Jigs Tools
Tools and Hardware
Bestsellers in Jigs Tools
Kreg SML-F125-1000 1 1/ 4-Inch No. 7 Fine Pocket Hole Screws with Washer-Head, 1000-PackKreg; Tools
Best price: $11.29
Price in other shops:
Kreg SML-C150-500 Pocket Hole Screws 1-1/ 2-Inch #8 Coarse Washer-Head 500ctKreg; Tools
Best price: $12.95
Price in other shops:
Kreg KMS7800 Solid Production StopKreg; Tools
Best price: $16.49
Price in other shops:
Kreg KMS7727 4 Non-Adhesive Measuring Tape (Left-Right Reading)Kreg; Tools
Best price: $4.99
Wal-Board Tools 08-001 16" Drywall Circle Cutter - Cuts up to 16" Diameter (AC-31)Wal-Board Tools; Tools
Best price: $6.35
Shop Fox D3171 Shelf Support Boring JigShop Fox; Tools
Best price: $14.99
Price in other shops:
Porter-Cable 51102 Maximum Security Mortiser 1-1/ 8-Inch x 2-3/ 4-InchPorter-Cable; Tools
Best price: $49.95
Porter Cable 5507 9/ 64-Inch Pilot Hole Bit for 552 Production Pocket CutterPorter-Cable; Tools
Best price: $10.00
Price in other shops:
Porter Cable 5503 7/ 64IN EXT LONG BITSPorter Cable; Tools
Price in other shops:
General Tool 840 Pro Doweling KitGeneral Tools; Tools
Best price: $21.95
Price in other shops:
Similar Tools and Hardware Products
Robert Larson 800-2875 Plastic Center FinderRobert Larson Co; Tools
Best price: $2.73
Price in other shops:
PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck SystemPSI Woodworking; Tools
Best price: $168.00
Price in other shops:
PSI Woodworking CJAWFJ2 Jumbo Flat JawsPSI Woodworking; Tools
Best price: $29.38
Price in other shops:
PSI Woodworking Products TM32 1/ 2-Inch Diameter Drill Chuck with a 2 MT MountPSI Woodworking; Tools
Best price: $32.43
Price in other shops:
PSI LCENTLT2 No. 2MT Heavy Duty Live Lathe CenterPSI Woodworking; Tools
Best price: $14.39
Price in other shops:
Wolverine Skew Grind AttachmentOneway Manufacturing; Tools
Best price: $29.95
Wolverine Vari-Grind AttachmentOneway Manufacturing; Tools
Best price: $52.95
Big Horn 19053 8-Inch Caliper Set, 3-PieceBig Horn; Tools
Best price: $17.81
8in Slow Speed GrinderWoodcraft Supply; Tools
Best price: $124.99
Commando Grinding Wheel Dresser with Flat Diamond Coated Surface for Truing Grinding & Deburring WheelsCommando Products, Inc.; Tools
Best price: $13.95