 |
Pony 9865 Board Boss Decking Tool for Installation by Pony
Product DetailsManufacturer: Pony Model: 9865 Color: Orange Product features: - The Pony Board Boss pulls deck boards into shape and simplifies deck installation!
- Pulls bowed and/or warped boards into position before screwing them down.
- Use with the Pony #50 pipe clamp fixture for ¾ pipe. Pipe clamp provides 2.5 screw length for infinite adjustment.
- Can be used anywhere along deck board, you are not limited to pulling only from the joists.
- Significantly less expensive and advantageous to similar products in market.
Accessories:
Tools and Hardware Reviews of Pony 9865 Board Boss Decking Tool for InstallationCustomer Review: BOSS Pont Deck Clamp Summary: 4 Stars
I bought it to use on some composite deck baords with hidden groove type fastners (Phantom II). The fastners required some extra pressure to get the correct spacing. These clamps really worked well. Make sure you get more than 1 since the pressure is transmitted by a narrow pipe clamp bar (1.5" wide) you will likely find it easier to use 2 clamps spaced some distance apart. I reccomend using this with actual Pony clamps since my Craftsman clamps did not have the same dimensions the BOSS fitting tended to pull up.
Description of Pony 9865 Board Boss Decking Tool for InstallationDecking material is notoriously unruly, especially after it has weathered a bit. If you don't get the boards down quickly, before they have a chance to warp, twist, and bow, let the Board Boss deck clamp help you take control. Just slip it onto an 18" long, 3/4" black iron pipe clamp (448-4050), then slide the movable pipe clamp end back onto the pipe. USA.
Hand Tools
|
 |
|
|
|