 |
Poulan Pro 400E 18-Inch 4 HP Electric Chain Saw by Poulan
 |
List Price: $89.99 Our Price: $77.29 You Save: $12.70 (14%) Availability: Usually ships in 24 hours Category: Lawn & Patio See more product details
|
Product DetailsManufacturer: Poulan Brand: Poulan Edition: Lawn & Patio Model: 400E Publisher: Poulan Studio: Poulan Music Label: Poulan Product features: - Poulan Pro electric chain saw with 4-HP motor gives you the flexibility to cut at various angles without the mess or hassle of gas
- 18-inch steel guide bar for precision and control
- Poulan Pro electric chain saw comes fully assembled
- Features an inertia blade brake, anti-kickback bar tip, and wrap-around handle for safety
- 1-year warranty
Accessories:
Tools and Hardware Reviews of Poulan Pro 400E 18-Inch 4 HP Electric Chain SawCustomer Review: Most electric chain saws are absolutly not heavy duty saws. Summary: 3 Stars
---[[eernest4 has an associates degree in electronics & ran a major appliance repair shop for 30 years, before retiring, so he knows electric motors, drive trains and mechanics only too well.]]---
eernest4 cuts 12 cord of fire wood yearly,since 2004, mostly with electric chainsaws & a 22 ton gas log splitter.
Electric saws not heavy duty compaired to gas saws;
SO you have to be very carefull babing them in order to get a long service life from them.
The polan pro 400 E 18inch electric chain saw will need to be babied
if a long service life is desired .
That does not mean that you can't use it much, you can use it a lot !!
With care, you can run the crap out of it, until you wear the plastic teeth off the drive wheel--BUT THE SAW WILL NOT TOLARATE ANY BAD-USE.
If you abuse it ,you will lose it!
you will need to know the rules so as not to trash your saw the first day you run it.
SO HERE THEY ARE!
(1.) allow time for the electric motor to cool down , say 20 min on and 20 min off cool down period. mAYBE 30 MIN ON & 20 MIN OFF IN 40 DEG TEMPS
That way ,the motor windings can cool down instead of burning up the insulation & then short circuting $ burning open. (brunt open means lack of an electrical path through
the motors copper windings.)
When this happens no electricty flows through the motor and it stops for good.
They are thin gague copper windings & can burn out when overheated by continual running.
The electric motor is very prone to
burning out if overheated by 2 - 3 hours plus of constant running.
So allow adiquate cool down time. When my saw's motor gets hot, its time for a coffee - "and"- break.
[2,]
Avoid anything that suddenly stops the chain from moving , such as getting the blade pinched when cutting wood and beware of the chain safety break which could also break the plastic of the reduction gear when it suddenly & abruptly stops the chain from turning.
The sudden stopping actin backs up the saw's direct drive train looking for the weakest gear tooth to break.
Electric saws are DIRECT DRIVE FROM THE MOTOR and have no clutches
so that the plastic drive train just breaks if the chain gets bound, either from being pinched by wood or sudenly stoped by the chain safety break.
The centrifical clutch of a gas saw does a lot to prevent damage to the gas saw , but electic saws have no clutch , so there is no torque slipage in the electric saw and all torque is transmitted directly & immediately, to the soft,weak plastic reduction gear drive wheel.
These weak points could be eliminated, but not in a 95$saw, maybe in a 270.oo saw. BUt, whereas You would buy a 95$ saw -- when you probably won't spring for a 270.oo$ saw.
The bottom line is all important in business.
The chain safety break is there to prevent the manifactuer from being sued, it is not there to stop the chain from turning without placing damaging stress on the saw's direct plastic drive train. So, don't use the chain break unelse you have to to prevent someone being injured.
I cut about 1/3 of an inch into my ring finger, 2 years ago with a
wen 14 inch electric saw and that cost me $1500.oo in emergency room bills and 12 stiches.
The moral is that safety & avoiding a 1500.oo medical bill is more important that trashing a 95.oo saw.
So use the chain brake to avoid an accident but don't use it if you don't have to.
The plastic reduction gear drive is very prone to breakage like any plastic is.
3.
Let the saw cut at its own speed, don't pressure the chain bar down hard into the wood as this slows down the electric motor which causes the motor to pull more amps & heat up faster and also causes undo stress on the plastic reduction gear in the drive train will looking for the weak plastic gear tooth to snap off the reduction gear.
These are problems common to all cheaper electric saws but the 4 hp motor as opposed to other electic saws with only 1.5 hp motors really has the potential to rip the crap out of the cheaply made plastic reduction gear if abused in the slightest.
The reason for the cheap parts is that you didn't pay 269.95 for a husquarvarnia electric saw. You paid 95$ for a poland.
Back in the 60's and 70's , they used metal gears in the electric chain saws of the time, but these saws tended to last for 20 to 30 years and ruined repeat sales of more saws. all 3 of my mcculocks and my wen are of that type, but the 2 remington's and the 2 polands all have the plastic reduction gear, so I only expect them to last 6 to 10 years, if that, with great care on my part.
If your are carefull with it, it will last until the first time you abuse it. Some people call this "opperator error."
4.
keep you chain sharp, tight, but not too tight and oilly as this reduced strain on the drive train & electric motor.
5.
Too tight of a chain will bind up even a gas saw & too loose of a chain, while it spins more freely, just ends up flying off to chain bar.
6 pay attention to your chain tension and don't let it get very loose.
ajust it immediately upon signs of slack ,but don't overtighten the chain. when properly adjusted, it should turn, by hand, easily. Be carefull not to cut your fingrs on the chain teeth. very easy to cut yourself. grasp the chain where there are no teeth & beware of your fingers slipping. If you have to pull the chain so hard that your fingers slip,it is too tight. loosen the chain before turning the chain by hand to check for peoper chain tension.
. buy a chain saw file & holder guide for 9.oo at sears to keep your chain sharp. read the sharpening directions.
NOW YOU ARE FORWARNED , so I guess you are fourarmed,Ben 10, but I only have two arms. I also have the constitutional right to bear arms , which the democrats say means its OK to wear short sleve shirts. Go figure!!
Description of Poulan Pro 400E 18-Inch 4 HP Electric Chain SawProviding cutting-edge features to help you power through jobs both big and small, the Poulan Pro 400E 18-Inch 4.0 HP Electric Chain Saw arrives fully assembled, so it's ready to go right out of the box. Great for yard maintenance and cleanup, this powerful yet lightweight tool gives you the flexibility to cut at various angles without the mess or hassle of gas. | The 400E 4.0 HP Electric Chain Saw offers:- An 18-inch steel bar for dependability and versatility
- Reliable electric power--no priming or gas required
- An inertia blade brake, anti-kickback bar tip, and wrap-around handle for safety
- Double insulation construction for electrical protection
| 
|
|
 A four HP electric engine delivers clean, efficient power. View larger. |  The 400E is designed for safety and comfortable handling. View larger. | Powerful Four HP Motor Tackles Yard Maintenance and Cleanup Powered by an efficient four HP electric engine, the Pro 400E is perfect for cutting firewood, pruning thick tree branches and bushes, cutting through fallen trees, and tackling other around-the-house chores. It also has a lightweight, portable design that minimizes strain on your body, even after extended use.Electric Power for No-Hassle Maintenance Because the 400E is an electric saw, it doesn't require priming pumps or gas, which can cause messes and strong odors in your yard. And thanks to the automatic chain oiler and large sight window, it's easy to maintain the proper lubrication level while you work. The 400E also operates at a lower noise level than many other models, making yard work more pleasant for you and your neighbors. Innovative Features for Precision, Control, and Safety The 400E includes an 18-inch steel guide bar for precision and control, a comfortable trigger for instant power, and important safety features like an inertia blade brake, anti-kickback bar tip, and a wrap-around handle to help protect users from injury. Double Insulated for Safety For additional safety, the 400E is double insulated to help protect against electric shock. Double insulation construction consists of two separate layers of electrical insulation instead of grounding. As a result, if you use an extension cord with your saw, it can be plugged into any standard 120-volt electrical outlet. The 400E is backed by a one-year warranty. About Poulan: Diverse, Powerful Yard Maintenance Equipment The Weed Eater, Poulan, and Poulan Pro lines of yard maintenance equipment are backed by a long heritage of innovation that traces its roots to 1944. From powerful riding mowers, lawn mowers, and tillers, to trimmers, blowers, snow throwers, and chainsaws, the Poulan name is synonymous with a dedication to quality and maximum effectiveness. These products utilize the most robust engines from the industry's leading suppliers for long lasting operation. The sheer power of a gas two-cycle handheld will help you get the best looking lawn in the neighborhood, while Poulan's line of electric trimmers, blowers, and chainsaws tackles those clean-up jobs around the house. What's in the Box Saw, scabbard, bar, chain, warranty card, and manual.
Categories Tools
|
 |