 |
Quick - Shelf Hangers Six Shelf 16" Deep Ceiling Mount Shelving Unit by Quick-Shelf Inc.
Product DetailsManufacturer: Quick-Shelf Inc. Model: C316006 Product features: - Up to 1,050 lb capacity
- Simple hook through contruction allows you to effortlessly hang shelves from each other
- Skip shelf boards to create "double tall" shelves.
- Accomodates 16" wide plywood or melamine.
- Overall size is 16-1/2" deep X 7ft-4" tall X board length wide [Rec 8 ft max for 3/4" thick wood]
Tools and Hardware Reviews of Quick - Shelf Hangers Six Shelf 16" Deep Ceiling Mount Shelving UnitCustomer Review: Simple, versatile, and strong Summary: 5 StarsThese shelf hangers are surprisingly easy to assemble and disassemble for relocation. Instead of drilling about 54 holes in the wall for the multiple support brackets for each shelf (3 screws/bracket x 3 brackets/shelf x 6 shelves), there are only 6 holes for the eye screws for the Quick Shelf. You don't need to install all of the under shelf clips for the Quick Shelf, but you should use all of the 18 additonal screws to attach the shelves to an L-bracket support.
The 6 shelves can be split into two sets of three or 4+2 or 5+1, or 2+2+2, etc. by adding only 6 or 12 eye screws.
Using full 1 inch thick pine boards, we made 10 foot long shelves with no sags. The product spec says it holds 1050 lbs. I believe it.
For wet basements and garages, they don't sit in water on the floor nor do they attach to a damp wall.
Description of Quick - Shelf Hangers Six Shelf 16" Deep Ceiling Mount Shelving UnitQuickly and easily create a ceiling mounted shelving unit in your garage, basement, shed, or wherever else desired. This kit delivers a total of four 12" tall shelves and two 16" tall shelves. Once the top shelf is hung, the remainder of shelf hangers are each hung from the one above it with the simple hook through construction. With only six ceiling attachment points for the entire rack of shelves, the only tools required are a drill, 3/16" drill bit, and a screwdriver (or 1-1/8" 6 point hex socket as shown in the above photo/s). The shelf hanger kit includes twelve 16" wide X 12" tall Shelf Hangers, six 16" wide X 16" tall Shelf Hangers, six 5/16" lag eye screws, and 24 hanger clips w/ mounting screws. Please note that shelf boards are not included. Home center stores such as Lowes and Home Depot will rip plywood shelves at minimal or no charge.
Storage Equipment Tools
|
 |
|
|
|