Rikon 10-325 14-Inch Deluxe Band Saw
by Rikon
 |
Category: Tools See more product details |
(Click here)
Product Details
Manufacturer: RikonModel: 10-325
Product features:
- Quick-release blade tension
- 2 speeds: 1445/2950 ft/min
- Hinged blade guard with sight window
- Large 16-by-21-1/2-inch work table
- 4-inch dust port
Tools and Hardware Reviews of Rikon 10-325 14-Inch Deluxe Band Saw
Customer Review: So far VERY impressed
Summary: 5 Stars
This saw is a very much needed upgrade to my Shopsmith 11". So far I've put the machine together, aligned it and made several test cuts which include re-sawing a 6" oak plank and turning a 4x4x12" block of cedar into a cylinder. I am VERY impressed! I will come back a year from now and write more detailed comments on the operations, but I thought I would leave my comments on assembly and first impressions while they were fresh in my mind. Any criticisms I have right now are on the level of nit-picking. I am overjoyed with this tool.
Unpacking hints:
This machine is shipped in one carton that weighs in just short of 260lbs. I am not a weak person but found it a bear to manipulate. 2 cartons, 1 containing the saw body and 1 containing everything else would be more reasonable. Unpacking the saw I would suggest you take everything but the saw out of the carton then stand the carton up and walk the saw out rather than trying to lift it out of the box. You will tear some cardboard and foam packaging but it is much easier and safer than trying to lift the unit out.
Assembly:
When I bought the saw, the salesman told me to allot about 8 hours for assembly and alignment. He wasn't lying. While nothing is very complicated, it is time consuming if you want to do it properly and a machine of this quality warrants the attention. I installed my unit in a General mobile base which I hope to review elsewhere since I am not very impressed with that item. Some other reviewers have talked of the need to add a sheet of plywood so the door of the stand wouldn't bind on the base. I did not find this so, but added a sheet anyway so that the top of the base floor would come even with the top of the mobile stand and look cool. Leave the shelf out (it really gets in the way) until the saw is in place and wait as the manual says to tighten the screws on the stand until the saw is in place. After assembly was finished I noticed the saw did wobble in the base more than I found acceptable, so I anchored the saw base to the mobile base from the sides using self-tapping screws. A better way would be through the base in the provided holes before putting the saw on. Lifting the saw on the base is best a 2 person job. While I could lift it myself, I didn't want to take a chance on scratching anything. With 2 people it's a piece of cake. Actually mounting the saw is not for anyone with big hands like me. It is best to build up your washers and nuts with double stick tape and put it up as a unit. A second wrench is also helpful here as it will be when setting the lower guide blocks. Assembling the work table is another 2 person job. It is somewhat heavy and must be placed exactly on the trunnion so strong arms holding it and young eyes to thread the bolts are a big help. I reversed the table leveling bar from the way it came in the box. This way it swings out for blade changes and out of the way. The downside is it protrudes about 1/16" from under the table but in my opinion is much more convenient. The rip fence goes on easily.
Alignment:
Here I encountered my first real disappointment. I attempted to align the table to the back of the blade (it was less than 1 degree out but I like things as perfect as I can make them) and found the pictures and instructions were obsolete. The trunnion is now anchored with 2 hex bolts, one which I could not loosen without taking the table off again so step skipped. Adjusting the upper blade guides is a snap. The lower guides however take more care. A second wrench again would be useful here so as to not turn the assembly when re-tightening the lock nut. I found the rip fence alignment kind of fiddly. For some reason when attempting to set the fence face 90 degrees to the table, it would go slightly askew when the nuts were tightened. It finally worked out, however. I omitted installing the guide scale since I prefer to measure and mark each cut anyway.
1st cuts:
I cannot believe how quiet a good machine is compared to cheaper units. I used the stock blade to do my test cuts. I re-sawed 6" of oak without a whimper as it cut the 4x4x12" cedar block into a cylinder. I tried 2 settings on the fence for re-sawing: one set for blade drift and one with the fence perpendicular to the table. The results were virtually identical. I can't wait to see what this machine does with a good blade in it.
What I like:
1. Power and the machine does run on a 15 amp breaker without popping it. I would not suggest adding anything else to the circuit though since the motor is rated at 14 amps
2. Cutting Height. Right out of the box this machine cuts to a height that its competitors require a riser block with all the readjustments connected to equal.
3. Work Table. Very nicely machined and polished.
4. Bearing Guides. Much superior to the guide blocks of my old machine.
5. Quick blade tension release.
6. Solidity of the machine and the fit and finish is far superior to all I've seen in its class.
What I don't like
1. The carton: 2 boxes would have been MUCH better.
2. The fence system: While I eventually got it aligned, the engineering is flawed here, especially for a otherwise high-class machine.
3. Lower Guide Blocks: This could also have been done better so that the guide assembly does not rotate.
4. Trunnion Adjustment: I just could not get this to work.
5. The bolt/washer/nuts assembly that holds the machine on the stand. There must be a better way.
Why?
1. is the light on the opposite side of where it is actually needed?
2. do the door latches latch down instead of up? If they latched up they could prevent any sag that comes with an aging machine by supporting the door rather than pushing it down.
3. is there no lock on the belt tension crank? It is right at kid height and my grand kids made a beeline for it as soon as they saw it.
4. are no exterior supports for the open end wrenches like there are for the allen wrenches?
Like I said at the beginning, aside from the stock fence, the other criticisms are just nit-picky type stuff. If the fence bothers me too much I'll upgrade to a Kreg or the like. Overall this is an incredible machine that is a class of its own.
Update 1 (1 week)
I solved the allen wrench problem to level that table to the back of the blade by tilting the table the other way (duh!) and then moving it back after the wrench was in place. Table is now perpendicular to the back of the blade, eliminate #4 from my don't like list. I haven't had a chance to get into town to get some good blades so am still using the stock blade. It cut a 9" very green apple log into boards without a whimper. Removing the bark from another 8" diameter piece of green apple to produce a cylinder (10" tall) almost stalled the machine at one point but recovered right away and didn't trip the breaker. Dust collection is ok. So far I haven't removed the bottom baffle as some people suggested. Very little dust (or in he case of the green apple, strands) remained in the the bottom cabinet with almost nothing migrating to the top cabinet.
Update 2 (1 month)
I had a problem in that the thrust bearing of the bottom blade guide fell off and as a result the stock blade was pushed into the lower guide bearings and dulled. Whether this was Rikon's fault or mine, I don't know, but henceforth I check that the bearings are tight before I saw. I have read a lot about the poor quality of the stock blade, and while it is not the greatest, increasing the tension on it makes it serviceable. On my machine the blade was shipped under tension, so who knows how much it stretched. I will have it re-sharpend. I replaced it with a 1/2" Viking blade that makes the machine totally amazing. I have tested it to the limit, sawing 13" green birch and aspen logs into blanks for later turning into bandsaw boxes. I've created a primitive sled to hold the rounds and if I can lift it I can saw it on the Rikon. I'm finding the blade tension scale pretty much useless. It is a good starting point, but using the "flutter" method of tensioning a blade always has the blades tensioned beyond what the scale would indicate. While there is some dust in the machine, I feel collection is acceptable but definitely not great. While I am working with green wood I clean the machine after each session anyway because of the moisture content of the sawdust and possible corrosion factor. Some criticisms in other reviews I don't understand. Changing blades on this machine is the easiest I have ever experienced. My first change was done in less than 2 minutes! I have no problem with being able to see through the alignment or tensioning windows even after hours of use. I am still VERY impressed!
Update 2 (6 months)
I continue to be very happy with this machine. I have resawed everything from spruce to maple with absolutely no problems. I have also done around a dozen band saw boxes of the same woods, using a 3/16" Viking blade to do the intricate cuts. Some on my blanks were 7" thick and the saw went through them like butter. VERY NICE! When working with well seasoned wood I have no dust collection problems even with my small 15 amp collection system. Green wood does build up in the machine. No matter what I am sawing I have not experienced the problems mentioned by other users of the alignment,blade and blade tension windows dusting up so they are useless. Now for my criticisms: The blade tension scale IS totally useless. All my Viking blades are way too loose (even by Viking's recommendations and 'flutter' tensioning method). I usually end up at least 1 blade thickness more in tension by the Rikon scale. When I installed a 3/4" blade the tracking mechanism bent the tension scale pointer so it no longer worked (it bends back very easily so not a big deal, but a little disconcerting the 1st time it happens). Finally the well-machined table that I liked so much is very soft and scratches very easily (Easier than my aluminum Shopsmith tables which look less beat-up after almost 20 yrs of use). One final matter of concern is that I received a bulletin from Rikon on Facebook saying that blowing out the machine with compressed air reduces the life of the drive and guide bearings. I have always blown out ALL my equipment at the end of a job. Apparently for Rikon a dirty machine is more healthy than one blown out. Those items aside, I am still extremely happy and impressed with the machine and would recommend it to anyone who wants large capacity and decent power in a 110V band saw.
Description of Rikon 10-325 14-Inch Deluxe Band Saw
Rikon Model 10-325 features two speeds (1445 and 2950 ft/min), a 13-inch resaw capacity and a powerful 1-1/2 HP 110/220V motor. Blade tracking and tension windows add safety while aligning your blade. Changing the blades (accepts 1/8-inch to 3/4-inch widths) is easy with a hinged blade guard that provides 2 inches of access; there's no twisting to install or remove blades. Quick release blade tension is designed to operate horizontally adding to the ease of use of this band saw. The 16-inch x 20-1/2-inch cast iron table is supported by a one-piece trunnion system. Hinged steel doors make access to the cast iron wheels easy and the tool holder keeps your tools accessible. The enclosed cabinet is accessible for storage of extra blades and jigs. Includes: micro adjustable blade guide bearings, work light, heavy-duty fence with resaw bar, and 4-inch dust port. Shipping weight is 261 lbs.Designed to give you options for cutting wood and non-ferrous materials, the award-winning RIKON 10-325 14-Inch Deluxe Bandsaw offers a large, cast iron work table, ball-bearing blade guides, and a powerful 1-1/2-horsepower motor with two speeds. With convenient features such as quick release blade tension, dust ports, and viewing windows to help with adjustments, this precision bandsaw also includes a heavy-duty rip fence with re-saw bar.
| ||||
 13-inch capacity allows for easy re-sawing of a variety of materials. View larger. |
 Large work table has tilt-and-lock capability and work light. View larger. |
 Balanced 14-inch bandsaw and sturdy rip fence for accurate cuts. View larger. |
The RIKON 14-Inch Deluxe Bandsaw is driven by a 1-1/2-horsepower, 110/220-volt motor that functions smoothly and powerfully. And with a 13-inch re-saw capacity, it can easily re-saw slicing veneers, book-matched projects, and lumber sizing. Precision-balanced, solid cast iron wheels give the blade uniform operation, and the edge-facing thrust bearings also help to extend blade and bearing life while improving the stability of the blade during cutting.
Two Speeds for Different Cutting Applications
With a 13-inch cutting capacity and two speed settings, the RIKON 14-Inch Deluxe Bandsaw can be used for a variety of applications. The 1,445-feet/minute setting is ideal for hardwoods, some plastics, and non-ferrous metals, while the 2,950-feet/minute setting can be used for other woodworking applications.
Convenient Features Increase Functionality
A large, 16-inch by 21-1/2-inch table provides plenty of additional work space during woodcutting operations. You can also easily tilt and lock the table into place with the solid cast table trunnion. A convenient tool storage cabinet at the bottom of the unit gives you a place to keep extra blades, jigs, or other tools.
Heavy Duty, Adjustable Rip Fence
An included rip fence can be mounted on either the right or left side of the blade, and a re-saw bar can be attached to help correct any blade wandering during re-sawing. You can easily correct the fence for blade drift by turning the adjustment collars and fence bolts.
Quick-Release Blades and Viewing Windows for Easy Adjustments
It's easy to assemble, operate, and adjust the RIKON 14-Inch Deluxe Bandsaw with the helpful manual, blade selection guide, and wheel adjustment tip sheet. Inset windows allow you to check the centering of the blade as well as the tension of the blade, so you can keep your operation running smoothly and accurately. You can also quickly release blade tension when changing blades or when the machine is off to help increase the life of the blade.
Dust Port Keeps Work Area Clean
The 4-inch dust port helps you keep dust out of the air when you attach your dust collection system to the port opening.
The RIKON 10-325 14-Inch Deluxe Bandsaw is backed by a manufacturer's two-year limited warranty.
What's in the Box
RIKON 10-325 14-Inch Deluxe Bandsaw, work table, base cabinet, rip fence, tool holder, work light, owner's manual, and parts for assembly.
 Make exacting cuts in hardwoods, plastics, non-ferrous metals, and more. |
Band Saws Tools
Tools and Hardware
Bestsellers in Band Saws Tools
Wilton 8201VS Variable Speed Wood and Metal Cutting Vertical Bandsaw,Wilton; Tools
Grizzly G0614 6" x 9-1/ 2" Swivel Metal-Cutting BandsawGrizzly; Tools
Best price: $1,895.00
Wilton 3130 5" x 8" Horizontal Bandsaw - Dry Metal Cutting, 1/ 2HP, 1PH, 115VWilton; Tools
Stout ST-CS250 portable cutting station bandsaw baseStout; Tools
Wilton 7040M 10-Inch 1-1/ 2 Horsepower Miter Metalworking Bandsaw, 230-Volt 3 PhaseWMH Tool Group; Tools
DEWALT D28770K 6 Amp 4-3/ 4-Inch-by-4-3/ 4-Inch Capacity 80 to 280 Feet Per Minute Variable Speed Portable Band Saw with CaseDEWALT; Tools
Best price: $319.00
Price in other shops:
Delta 28-248 14-Inch 1-1/ 2 Horsepower Woodworking Band Saw, 115-Volt, 1 PhaseDelta; Tools
Price in other shops:
Grizzly G0555 The Ultimate 14" BandsawGrizzly; Tools
Best price: $525.00
JET 708115K JWBS-14CS 14-Inch 1 Horsepower Woodworking Bandsaw with Graphite Guide Blocks, 115/ 230-Volt 1 PhaseJET; Tools
Best price: $699.99
Price in other shops:
JET 414459 HVBS-7MW 7-Inch 3/ 4-HP Horizontal/ Vertical Bandsaw, 115/ 230-Volt 1-PhaseJET; Tools
Price in other shops:
Similar Tools and Hardware Products
DELTA 50-760 1.5HP 1,200 CFM Vertical Bag Dust CollectorDelta; Tools
Best price: $399.00
Price in other shops:
CARTER ACCURIGHT 111 X 1/ 8 X 14 TPI BANDSAW BLADECarter Products; Tools
Best price: $24.99
Price in other shops:
The New Complete Guide to the Band Saw: Everything You Need to Know about the Most Important Saw in the Shopby Mark Duginske
Fox Chapel Publishing; Published: 2007-05-01; Paperback; Book
Best price: $10.95
Price in other shops:
Timber Wolf Bandsaw Blade 111" x 1/ 2", 4TPIPS WOOD MACHINES; Tools
Best price: $30.99
Woodstock W1044 4-to-2-1/ 2-Inch ReducerWOODSTOCK; Tools
Best price: $1.25
Price in other shops:
Timber Wolf Bandsaw Blade 111" x 3/ 4", 3TPIPS WOOD MACHINES; Tools
Best price: $38.99
Timber Wolf Bandsaw Blade 111" x 1/ 4" 10 TPIPS WOOD MACHINES; Tools
Best price: $28.99
Taunton's Complete Illustrated Guide to Bandsaws (Complete Illustrated Guides)by Roland Johnson
Taunton Press; Published: 2010-11-09; Paperback; Book
Best price: $15.23
Price in other shops:
The Bandsaw Bookby Lonnie Bird
Taunton Press; Published: 1999-10-01; Paperback; Book
Best price: $9.60
Price in other shops:
HTC HTC2000 Universal Mobile BaseHTC; Tools
Best price: $67.30
Price in other shops: