Wilton 3410 6-Inch 3/4-Horsepower Wet Horizontal Metalworking Bandsaw, 115-Volt 1 Phase
by WMH Tool Group
 |
List Price: Category: Tools See more product details |
(Click here)
Product Details
Manufacturer: WMH Tool GroupModel: 3410
Product features:
- 3/4-horsepower wet horizontal metalworking band saw with 115-volt motor
- Coolant pump; automatic shutoff for safety; adjustable hydraulic feed system
- Cast-iron table and saw head; steel blade drive; heat-treated worm; cast-iron blade wheels
- Wheeled base increases portability
- 2-year warranty
- Jet 708718R Band Saw Rip Fence With Resaw Guide
- Milwaukee 48-08-0260 Band Saw Table
- Kreg KMS7200 Bandsaw Fence
Tools and Hardware Reviews of Wilton 3410 6-Inch 3/4-Horsepower Wet Horizontal Metalworking Bandsaw, 115-Volt 1 Phase
Customer Review: An excellent bandsaw for it's size
Summary: 5 Stars
I have used this saw extensively for about 2 months now and can find little to fault it. The saw cuts accurately, is easy to adjust, and works well with the water soluable cutting oil I use. The machine is well made with quality heavy duty materials through out.I trimmed a piece of 3" channel with it that measured only 1/1000 of an inch different from top to bottom (and the trim piece was only .28" thick). Nice work for a saw in this price range! The cutting oil pump works well and is easy to adjust the flow.
The only things I would like to see added to the saw would be a splash guard for the cutting oil on the off-side, locks for the wheels so that it doesn't roll around so easily, and a way to lock the blade up from the on-board side while I make adjustments for my cut. - All of which can I built and added after the first few days of use. Tapering the drain pan a bit would also be nice so that cutting oil isn't left in pools on it. All of the things are minor though, and if you are looking for a saw to cut small to medium size steel in a shop, I recommend it totaly.
- The instruction book (which is good) says it takes 1 gallon of cutting oil. One gallon will barely be enough to get the pump to work. Figure 2-3 gallons.
- Buy a couple Starrett or Lenox blades as the saw comes with only one and it didn't last but a few dozen cuts with me.
- Tweek the adjustments on the blade after a few cuts. The saw comes well set up but it can be tuned a bit better.
- Make sure you have a way to unload the saw if you have to pick it up from the shipping company. This thing is heavy and it comes crated completly set up (other than the putting on the wheels).
More Wilton 3410 6-Inch 3/4-Horsepower Wet Horizontal Metalworking Bandsaw, 115-Volt 1 Phase Customer Reviews:
1
1
Description of Wilton 3410 6-Inch 3/4-Horsepower Wet Horizontal Metalworking Bandsaw, 115-Volt 1 Phase
The Wilton 7in. x 12in. wet horizontal band saw features heavy-duty construction for accuracy and long service life. Cordless: No, Cutting Capacity - Flat Stock (in. x in.): 7 x 12, Blade Type: SteelBand Saws Tools
Tools and Hardware
Bestsellers in Band Saws Tools
Wilton 8201VS Variable Speed Wood and Metal Cutting Vertical Bandsaw,Wilton; Tools
Grizzly G0614 6" x 9-1/ 2" Swivel Metal-Cutting BandsawGrizzly; Tools
Best price: $1,895.00
Wilton 3130 5" x 8" Horizontal Bandsaw - Dry Metal Cutting, 1/ 2HP, 1PH, 115VWilton; Tools
Stout ST-CS250 portable cutting station bandsaw baseStout; Tools
Wilton 7040M 10-Inch 1-1/ 2 Horsepower Miter Metalworking Bandsaw, 230-Volt 3 PhaseWMH Tool Group; Tools
DEWALT D28770K 6 Amp 4-3/ 4-Inch-by-4-3/ 4-Inch Capacity 80 to 280 Feet Per Minute Variable Speed Portable Band Saw with CaseDEWALT; Tools
Best price: $319.00
Price in other shops:
Delta 28-248 14-Inch 1-1/ 2 Horsepower Woodworking Band Saw, 115-Volt, 1 PhaseDelta; Tools
Price in other shops:
Grizzly G0555 The Ultimate 14" BandsawGrizzly; Tools
Best price: $525.00
JET 708115K JWBS-14CS 14-Inch 1 Horsepower Woodworking Bandsaw with Graphite Guide Blocks, 115/ 230-Volt 1 PhaseJET; Tools
Best price: $699.99
Price in other shops:
JET 414459 HVBS-7MW 7-Inch 3/ 4-HP Horizontal/ Vertical Bandsaw, 115/ 230-Volt 1-PhaseJET; Tools
Price in other shops: